 Leaking valves, Ahrghhh! |
 May 26, 2015 - 9:18 PM
|
 
|
 Enthusiast  Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%)  |
My efing valves are leaking! I lapped them down to the right height as suggested by delta cams. Now after installing the valve springs I poured some paint thinner in the ports to do a leak test and the thinner is coming out through the valves and into the combustion chamber. Any thoughts?? What did I do wrong?
-------------------- |
Posts in this topic
doory100 Leaking valves May 26, 2015 - 9:18 PM
Bitter Well valves don't seal 100% when they're f... May 26, 2015 - 9:47 PM doory100 that's what I thought. are you sure? May 27, 2015 - 5:23 AM Smaay what did you set the valve clearance too? May 27, 2015 - 9:30 AM Bitter I'm assuming you have a nice even gray band al... May 27, 2015 - 10:58 AM doory100 QUOTE (Smaay @ May 27, 2015 - 10:30 ... May 27, 2015 - 6:46 PM Bitter Might need more than a wipe with a rag, try a spra... May 27, 2015 - 8:11 PM doory100 Ok but should they be water tight or do they need ... May 27, 2015 - 9:38 PM Bitter I think they need to run a bit first, you've g... May 27, 2015 - 11:01 PM Box Like already mentioned make sure all of the compou... May 28, 2015 - 1:07 AM enderswift the pressure of compression and combustion helps s... May 28, 2015 - 7:12 AM RocketScott They should seal, there isn't a break in with ... May 28, 2015 - 9:05 PM doory100 I lapped in new valves with a drill. The drill had... May 28, 2015 - 10:06 PM TerryE You might want to take your head in and have it do... Jun 2, 2015 - 1:32 AM TerryE P.S. Don't watch Youtube so much. Jun 2, 2015 - 1:42 AM doory100 the only reason for the drill was that I had to se... Jun 5, 2015 - 10:45 PM doory100 Here are some pictures of the valve stem seats.
... Jun 5, 2015 - 10:52 PM Smaay what valves are those? they are NOT OEM Jun 7, 2015 - 10:00 PM
doory100 no there not oem. Why are you jealous?
Got them t... Jun 8, 2015 - 11:31 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 23rd, 2025 - 12:06 PM |