FS: CF Hood, CF Hatch, hatch trunk cover, 17" wheels/tires, more., clearing out the garage Options

[forkee]

Hey guys! so i've since donated my 6gc after the engine froze (thank you nonfunctioning dash light!), but I still have some stuff laying around and figured someone on here might put to good use:

VIS carbon fiber hood invader style - undamaged but clear coat is gone, now hazy. I'm sure you can sand it down and regloss it or your choice of paint, otherwise functions perfectly. uses stock hood locking (no need for hood pins). super lightweight - asking $300

VIS carbon fiber hatch WITH TINTED GLASS attached (just take off your old hatch and bolt this one right up, no need to switch glass) - undamaged but clear coat is starting to fade in certain areas. same with hood, it can be reconditioned like new with a clear top coat or paint. uses stock trunk locking. super lightweight. includes plastic trunk underside surround pieces. does not have hole for wiper or nozzle (if you add yours you will need to reinforce with a bracket) - asking $400.

if you want both of the above, i can knock off $200 off total, so $500 for the pair.

hatch trunk cover. has the two side dangly bits but no trunk lid bracket- $40.

- unpainted (primer gray) rear invader style fiberglass bumper - asking $100
- black front invader style fiberglass bumper (already premolded to fit the lights) - asking $250

i can do both the front and back for $300

- (4) 17" rage breaker rims with tires. all have various degrees of curb rash on them, easily fixed with plastidip. 2 tires have 95% tread and the other two look to have a little more than 50%. - asking $400.

that's all for now....getting a lil too hot to see what else is in the garage, but will add more if i find.

i can take pics for those interested, just lmk!

thanks