 5sfte with 2nd gen 3s injectors? |
 Mar 29, 2015 - 5:55 PM
|
 
|
|
Enthusiast  Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%)  |
I have a 95 GT and over the past 2 years ive acquired quite a few Things, enough to turbo the 5sfe.
my question is, could i used 2nd gen 3sgte injectors to do this? I have the fuel rail and stock fpr also. Other things i have are map sensors (both 2nd gen and 3rd) intercooler, piping, downpipe, boost and oil pressure gauges, about to order a manifold and i access to an safc if necessary (or could buy emanage) i recently sold the ct26 turbo i had but can always pick another one up if i can use the injectors. Dont wanna spend too much money because i plan on buying a 3rd gen 3s very soon. But if i can turbo the 5s with the stuff i already have then hey i may as well do it. If it blows up then idc, im buying a 3s anyways. If it runs good then ill just run the 5sfte til it blows or i get tired of it. -------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM)  I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
Posts in this topic
Arturio55 5sfte with 2nd gen 3s injectors? Mar 29, 2015 - 5:55 PM
Smaay easy answer, no. long answer yes but you have to ... Mar 29, 2015 - 6:59 PM
Arturio55 QUOTE (Smaay @ Mar 29, 2015 - 6:59 P... Mar 29, 2015 - 7:41 PM Smaay yes those should work and thats a good deal. Mar 29, 2015 - 10:09 PM lagos I don't think that the 3sgte fuel rail will bo... Mar 31, 2015 - 7:24 PM Arturio55 QUOTE (lagos @ Mar 31, 2015 - 8:24 P... Apr 18, 2015 - 3:01 PM Smaay ^^^^ this Mar 31, 2015 - 9:18 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 26th, 2025 - 9:06 AM |