![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 10, '08 From Socal, OC Currently Offline Reputation: 7 (100%) ![]() |
scrapin on the daily
![]() This post has been edited by sunwukongg: Feb 4, 2011 - 1:25 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 20, '08 From Seattle, WA Currently Offline Reputation: 5 (100%) ![]() |
Nice.
-------------------- 2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE |
![]() |
|
Enthusiast ![]() ![]() Joined Dec 14, '10 From Lansing MI Currently Offline Reputation: 1 (100%) ![]() |
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
hey sunwukogg's you want free extended ichiba wheel studs. then all you have to do is spend about $160 for 10mm spacers. just sayin
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 10, '08 From Socal, OC Currently Offline Reputation: 7 (100%) ![]() |
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
hey sunwukogg's you want free extended ichiba wheel studs. then all you have to do is spend about $160 for 10mm spacers. just sayin are you selling the spacers? haha no thats why I said you have to buy them. Im only selling the wheel studs and the largest you can go on them is 10mm. Since no one has made an offer on my wheel studs I'll give em to you for free. 10mm wheel spacers usually run about $200. so you'll be saving yourself about $40. the link to the website where they sell hub centric spacers are on my buying/selling thread. -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 10, '08 From Socal, OC Currently Offline Reputation: 7 (100%) ![]() |
hey sunwukogg's you want free extended ichiba wheel studs. then all you have to do is spend about $160 for 10mm spacers. just sayin are you selling the spacers? haha no thats why I said you have to buy them. Im only selling the wheel studs and the largest you can go on them is 10mm. Since no one has made an offer on my wheel studs I'll give em to you for free. 10mm wheel spacers usually run about $200. so you'll be saving yourself about $40. the link to the website where they sell hub centric spacers are on my buying/selling thread. dang..i was planning on getting 20-25mm spacers though.. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) ![]() |
Wheel spacers are not that expensive, you can get good quality NON-EBAY bolt on spacers for less than 300 shipped for all 4
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 10, '08 From Socal, OC Currently Offline Reputation: 7 (100%) ![]() |
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 20, '08 From Seattle, WA Currently Offline Reputation: 5 (100%) ![]() |
Yeah man, I would definitely go bigger than 10mm. The 20-25mm range would look hot.
-------------------- 2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 10, '08 From Socal, OC Currently Offline Reputation: 7 (100%) ![]() |
the thing is my tires are tucked and about an inch away from the fender. im wondering if i get 25mm would it make my tires rub against the fender?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
the thing is my tires are tucked and about an inch away from the fender. im wondering if i get 25mm would it make my tires rub against the fender? 25mm is .98 inches. Just roll your fenders. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 10, '08 From Socal, OC Currently Offline Reputation: 7 (100%) ![]() |
the thing is my tires are tucked and about an inch away from the fender. im wondering if i get 25mm would it make my tires rub against the fender? 25mm is .98 inches. Just roll your fenders. since the front is factory rolled im assuming id only need to roll the rear.. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
since the front is factory rolled im assuming id only need to roll the rear.. Lol exactly. I just say fenders because I assume most everyone knows that ![]() -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 15, '10 From The Best Coast Currently Offline Reputation: 12 (100%) ![]() |
since the front is factory rolled im assuming id only need to roll the rear.. Lol exactly. I just say fenders because I assume most everyone knows that ![]() ^from the guy 5 feet off the ground ![]() Rolled fenders on your car would be FTW! |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
since the front is factory rolled im assuming id only need to roll the rear.. Lol exactly. I just say fenders because I assume most everyone knows that ![]() ^from the guy 5 feet off the ground ![]() Rolled fenders on your car would be FTW! ![]() -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) ![]() |
since the front is factory rolled im assuming id only need to roll the rear.. Lol exactly. I just say fenders because I assume most everyone knows that ![]() ^from the guy 5 feet off the ground ![]() Rolled fenders on your car would be FTW! says the guy with stock gts rims ![]() Neil, remove your front inner linings and spray rubberized coating and protect any electrical stuff, then pound the tags that held the fender lining. You should be good front there on. -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) ![]() |
Wheel spacers are not that expensive, you can get good quality NON-EBAY bolt on spacers for less than 300 shipped for all 4 the link you had on Flush wheel fitment.. this would mean i need extended lugs right? and those aren't included? No, the link that i sent you the spacers bolt on, and then they have studs attached to the spacers that the wheel goes on -------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
![]() |
|
Enthusiast ![]() ![]() Joined Dec 23, '10 From PA, USA Currently Offline Reputation: 0 (0%) ![]() |
Why is your car so low...Can you even go over a slight curb or pull in to places off the street? lol |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
Why is your car so low...Can you even go over a slight curb or pull in to places off the street? lol I think he manages like this guy http://www.youtube.com/watch?v=JGjgCsOrV2A -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() ![]() |
Lo-Fi Version | Time is now: June 22nd, 2025 - 7:19 AM |