6G Celicas Forums

Welcome Guest ( Log In | Register )

19 Pages V  « < 8 9 10 11 12 > »   
Reply to this topicStart new topic
> 1999 Celica GT with VVT-I Inside, new video up 8/6/22
post Oct 6, 2011 - 1:17 AM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




really? as it looks like you just edited 6 minutes after my post... smile.gif
QUOTE
This post has been edited by BonzaiCelica: Today



--------------------
post Oct 6, 2011 - 8:41 AM
+Quote Post
ricochet1490



Enthusiast
****
Joined May 3, '11
From Ohio
Currently Offline

Reputation: 8 (100%)




YES! extend the blue line to the grey dot though to make it longer. That's what I want. EXCEPT the measurement needs to be taken on your stock intake. I need to know what factory conditions are.


--------------------
post Oct 6, 2011 - 8:54 AM
+Quote Post
stephen_lee



Enthusiast
*****
Joined Mar 22, '07
From Houston, TX
Currently Offline

Reputation: 4 (100%)




he wants this:




--------------------
QUOTE
"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH

1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED
1995 ST: SOLD @273k miles, Auto, all power, CarPC, White
1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810
1994 Lexus LS400: This is my new DD
post Oct 6, 2011 - 9:01 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (stephen_lee @ Oct 6, 2011 - 8:54 AM) *
he wants this:




oh wow then like I said before its half of the inner diameter. Inner diameter = 71mm. and half of that as we learned back in the 3rd grade is 35.5mm..... confused.gif

This post has been edited by BonzaiCelica: Oct 6, 2011 - 9:01 AM


--------------------
For Sale Items:
post Oct 6, 2011 - 9:38 AM
+Quote Post
ricochet1490



Enthusiast
****
Joined May 3, '11
From Ohio
Currently Offline

Reputation: 8 (100%)




Are you kidding me??I can tell by looking at it that it isn't centered. This isn't rocket science. Measure the thing. It's not in the middle. On page 9 one of the guys even says it isn't centered. I bet it's about 8mm offset.


--------------------
post Oct 6, 2011 - 10:29 AM
+Quote Post
stephen_lee



Enthusiast
*****
Joined Mar 22, '07
From Houston, TX
Currently Offline

Reputation: 4 (100%)




QUOTE (ricochet1490 @ Oct 6, 2011 - 9:38 AM) *
Are you kidding me??I can tell by looking at it that it isn't centered. This isn't rocket science. Measure the thing. It's not in the middle. On page 9 one of the guys even says it isn't centered. I bet it's about 8mm offset.



^this^^

actually try to measure from the red circle in the middle to the base of the sensor... it would give a more accurate reading

this



--------------------
QUOTE
"And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH

1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED
1995 ST: SOLD @273k miles, Auto, all power, CarPC, White
1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810
1994 Lexus LS400: This is my new DD
post Oct 6, 2011 - 6:07 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




Alright, picked up a caliper today. Here are the pictures of the SARD measurements.

Not perfectly centered. Close, but not perfect.


Inner diameter- interestingly enough, 72.3 mm, not 71.


Outer diameter- 76.42 mm.


As close as I can estimate, MAF center measurement- 38 mm.



--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Oct 6, 2011 - 6:16 PM
+Quote Post
ricochet1490



Enthusiast
****
Joined May 3, '11
From Ohio
Currently Offline

Reputation: 8 (100%)




Dan
Thank-you! Now to find out what the stock is so that we can compare!! smile.gif


--------------------
post Oct 6, 2011 - 7:45 PM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




The OEM intake is half the price as the SARD and works better. My choice is clear.


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Oct 6, 2011 - 9:11 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




richee you interestingly, posted that the inner diameter on the sard is 72.3mm. haha funny I find that my ebay intake piping is actually 71.3mm so its only 1mm larger. I actually measured the inner diameter on my aluminum piping where it meets the end of a 90 degree bend. So in turn my ebay piping is basically identical to you sard inner diameter.

Your maf sensor is more dead center then my ebay setup. All this talk about turbulence. When you look at the sard air filter itself it looks as if it would cause lots of turbulence just like the mushroom green filter. The Apexi and Fujita cause the least turbulence by design and claims made by the above illustration I posted. I"d like to get my hands on the sard to see air/fuel ratio. Since it's been claimed to make more power over the stock box. I"ll get the measurements tomorrow on the stock maf sensor location.




This post has been edited by BonzaiCelica: Sep 10, 2012 - 9:27 PM


--------------------
For Sale Items:
post Oct 7, 2011 - 3:40 AM
+Quote Post
njccmd2002



Enthusiast
*****
Joined Mar 15, '07
From Tennessee
Currently Offline

Reputation: 52 (100%)




reckon you want to have an intake collection.

laugh.gif


--------------------
Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL

If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in

2grfe Swapped... Why I chose the 2GR, before you ask read here...

A great civilization is not conquered from without until it has destroyed itself from within.


@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
post Oct 8, 2011 - 3:41 AM
+Quote Post
blackthunder



Enthusiast
*
Joined Oct 21, '05
From Okinawa, Japan
Currently Offline

Reputation: 0 (0%)




I guess I can add to this thread fo the sake of more information.. laugh.gif

this is the ebay intake setup (yeah it's not the greatest but I'm cheap, lol):



Using a ****ty caliper to measure out 73.5mm:



and this is where it sits inside. Sorry can't measure the distance since it sits too far down the piping:



so, yeah...


--------------------
-Dan
1998 SSII Beams, work in progress...
post Oct 9, 2011 - 2:01 PM
+Quote Post
ricochet1490



Enthusiast
****
Joined May 3, '11
From Ohio
Currently Offline

Reputation: 8 (100%)




^ it looks deeper than center from here but hard to tell. I'm comparing it to the grains of the metal pipe on the side. About where the shadows change and the circle turns vertical. Does it work alright? What fuel do you run in her?


--------------------
post Oct 11, 2011 - 11:55 AM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Offline

Reputation: 59 (100%)




For what it's worth, I had a 1MZ Camry Weapon-R intake when I first swapped. It had 3 nipples next to the MAF and that's why I ditched it. I noticed when I got the SARD that low-end power didn't feel as good as before. I measured the Weapon-R a few days ago and it was 71.5 mm. Who knew that .8 mm would cost a noticeable difference?


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.
post Oct 11, 2011 - 2:47 PM
+Quote Post
ricochet1490



Enthusiast
****
Joined May 3, '11
From Ohio
Currently Offline

Reputation: 8 (100%)




QUOTE (richee3 @ Oct 11, 2011 - 12:55 PM) *
For what it's worth, I had a 1MZ Camry Weapon-R intake when I first swapped. It had 3 nipples next to the MAF and that's why I ditched it. I noticed when I got the SARD that low-end power didn't feel as good as before. I measured the Weapon-R a few days ago and it was 71.5 mm. Who knew that .8 mm would cost a noticeable difference?

smile.gif - ahh the power of fluid mechanics lol
Still waiting on that stock airbox measurement if anyone wants to take the time...


--------------------
post Oct 11, 2011 - 3:52 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




yup yup here it is :



also was shortening the fuel line from the fuel filter to the fuel rail and came out with this. Also buying that same line that goes from the fuel filter to the fuel rail from toyodiy is about $180 plus shipping. they are out of their minds. I should have no problems with this setup right?




This post has been edited by BonzaiCelica: Feb 25, 2013 - 4:25 PM


--------------------
For Sale Items:
post Oct 11, 2011 - 4:12 PM
+Quote Post
SupraKid



Enthusiast
*****
Joined Aug 15, '10
From The Best Coast
Currently Offline

Reputation: 12 (100%)




Who the **** is this guy? And who made him jesus?
post Oct 15, 2011 - 1:47 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




so ricochet I've got the measurement for you. Whats the verdict??!


--------------------
For Sale Items:
post Oct 15, 2011 - 7:26 PM
+Quote Post
ricochet1490



Enthusiast
****
Joined May 3, '11
From Ohio
Currently Offline

Reputation: 8 (100%)




when i can find time to do those calculations I'll let you know.


--------------------
post Oct 16, 2011 - 7:05 PM
+Quote Post
njccmd2002



Enthusiast
*****
Joined Mar 15, '07
From Tennessee
Currently Offline

Reputation: 52 (100%)




lol, now ill go home and put the noose in my neck


--------------------
Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL

If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in

2grfe Swapped... Why I chose the 2GR, before you ask read here...

A great civilization is not conquered from without until it has destroyed itself from within.


@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.

19 Pages V  « < 8 9 10 11 12 > » 
Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 29th, 2024 - 2:43 AM