6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Transmission Issue.
post Apr 10, 2012 - 5:29 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




The issue I have is when I get on it and go from 3rd to overdrive it shifts hardly back down to 3rd and then back into overdrive. Any ideas on what this could be? I've taken it to a shop a few times but it's never happened to them. It also only happens at higher revs.

This post has been edited by 1994Celica: Apr 10, 2012 - 5:38 PM


--------------------
JDM Part King

post Apr 10, 2012 - 6:34 PM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




it's just automatically downshifting for you. Technically you should just be leaving it in O/D because since it is an automatic, it does the work for you.
The reason it downshifts is because if you get on it, the engine will bog more in 4th gear than it will in 3rd. When my was an auto, I use to double tap the gas really quick (like in the arcade racing games where you'd get it to wheelie) and it would downshift from 4th (O/D) to 2nd.
post Apr 10, 2012 - 6:37 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




QUOTE (mkernz22 @ Apr 10, 2012 - 7:34 PM) *
it's just automatically downshifting for you. Technically you should just be leaving it in O/D because since it is an automatic, it does the work for you.
The reason it downshifts is because if you get on it, the engine will bog more in 4th gear than it will in 3rd. When my was an auto, I use to double tap the gas really quick (like in the arcade racing games where you'd get it to wheelie) and it would downshift from 4th (O/D) to 2nd.

So when I floor it and it goes from third to (O/D) and back to 3rd kind of hard and then finally into (O/D) its normal?.

This post has been edited by 1994Celica: Apr 10, 2012 - 6:38 PM


--------------------
JDM Part King

post Apr 10, 2012 - 6:39 PM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




Are you already in overdrive when you floor it?
post Apr 10, 2012 - 6:40 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




QUOTE (mkernz22 @ Apr 10, 2012 - 7:39 PM) *
Are you already in overdrive when you floor it?

No I'm in third.I floor it and the revs reach the top of the range it goes into O/D for a sec, back down to third and the back into O/D

This post has been edited by 1994Celica: Apr 10, 2012 - 6:48 PM


--------------------
JDM Part King

post Apr 10, 2012 - 6:50 PM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




Ohhhhh. I couldn't tell you then, never happened to me. Sorry kindasad.gif
post Apr 10, 2012 - 6:54 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




It's ok thanks for trying though. It's weird the car runs fine and shifts fine but it only has that issue if I get on it and take it to the top of the rev range. I'll just try and keep the revs low.


--------------------
JDM Part King

post Apr 11, 2012 - 6:56 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




Someone told me that it might be the ECU could that be the problem?


--------------------
JDM Part King

post Apr 11, 2012 - 8:11 PM
+Quote Post
Special_Edy



Enthusiast
****
Joined Oct 29, '11
From Haltom City, Texas
Currently Offline

Reputation: 1 (100%)




QUOTE (1994Celica @ Apr 11, 2012 - 6:56 PM) *
Someone told me that it might be the ECU could that be the problem?

The ECU is a possible cause for almost any drivetrain problem. 99.9% of the time it is not the cause of the problem, and its also perhaps the single most expensive component on the vehicle. Its rare that someone replaces their ECU and doesnt have a bunch of new issues because the ECU isnt programmed correctly, so make the ECU the last possible item on your list of things that may be wrong.

Whens the last time you drained the transmission fluid, replaced the filter, and refilled with new fluid?

This post has been edited by Special_Edy: Apr 11, 2012 - 8:12 PM
post Apr 11, 2012 - 9:45 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




QUOTE (Special_Edy @ Apr 11, 2012 - 9:11 PM) *
QUOTE (1994Celica @ Apr 11, 2012 - 6:56 PM) *
Someone told me that it might be the ECU could that be the problem?

The ECU is a possible cause for almost any drivetrain problem. 99.9% of the time it is not the cause of the problem, and its also perhaps the single most expensive component on the vehicle. Its rare that someone replaces their ECU and doesnt have a bunch of new issues because the ECU isnt programmed correctly, so make the ECU the last possible item on your list of things that may be wrong.

Whens the last time you drained the transmission fluid, replaced the filter, and refilled with new fluid?

Probably when I had the transmission rebuilt around 5-6 thousand miles ago.


--------------------
JDM Part King

post Apr 12, 2012 - 1:59 AM
+Quote Post
ILoveMySilly97



Enthusiast
*****
Joined Mar 8, '12
From Hanford/Fresno, Ca
Currently Offline

Reputation: 20 (100%)




It's possible that it can be the VSS but I doubt it since it's only O/D that's not working properly. Does your cruise control still work and is it idling properly?


--------------------
post Apr 12, 2012 - 6:42 AM
+Quote Post
trdproven



Enthusiast
*****
Joined Aug 2, '05
From Guam
Currently Offline

Reputation: 15 (100%)




its possible a shift solenoid problem, do a tranny code check. 63 62 codes are what to expect. just had a similar issue when my car was auto.

This post has been edited by trdproven: Apr 12, 2012 - 6:48 AM


--------------------
94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi|
|Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto|
|Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8
04 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|

89 Supra (Sold)
90 Supra (Sold)
post Apr 12, 2012 - 4:59 PM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




QUOTE (ILoveMySilly97 @ Apr 12, 2012 - 1:59 AM) *
It's possible that it can be the VSS but I doubt it since it's only O/D that's not working properly. Does your cruise control still work and is it idling properly?

I don't have cruise but it seems to idle around 900rpm, and it seems fine. Also how would I check the codes?

This post has been edited by 1994Celica: Apr 12, 2012 - 5:00 PM


--------------------
JDM Part King

post Apr 12, 2012 - 7:43 PM
+Quote Post
trdproven



Enthusiast
*****
Joined Aug 2, '05
From Guam
Currently Offline

Reputation: 15 (100%)




i think its the same jumper as the engine check one, but the O/D blinks and those are the ones you count.


--------------------
94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi|
|Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto|
|Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8
04 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy|

89 Supra (Sold)
90 Supra (Sold)
post Apr 14, 2012 - 2:06 PM
+Quote Post
ILoveMySilly97



Enthusiast
*****
Joined Mar 8, '12
From Hanford/Fresno, Ca
Currently Offline

Reputation: 20 (100%)




QUOTE (1994Celica @ Apr 12, 2012 - 5:59 PM) *
QUOTE (ILoveMySilly97 @ Apr 12, 2012 - 1:59 AM) *
It's possible that it can be the VSS but I doubt it since it's only O/D that's not working properly. Does your cruise control still work and is it idling properly?

I don't have cruise but it seems to idle around 900rpm, and it seems fine. Also how would I check the codes?


http://www.6gc.net/howto/determine_check_engine_light_codes

That's the how to check check engine light codes. It could possibly be the selenoid too since your car is auto.


--------------------

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 26th, 2025 - 12:22 PM