FS: parting out a 94 GT Hatch *Completed*, **Done Parting Car Out** Options

[CelicaB]

edit: im not selling anymore parts so this can be closed





I came across a 94 GT hatch at a junkyard with a thrown rod (i knew the kid who used to own it, before i found it at the junkyard, and im pretty sure he just ran a high mileage engine out of oil then reved the thing to death)

anyways i only needed the doors, tranny, brake assemblys, headlights, and a couple other little things but the whole car was pretty cheap so....i have an extra car sitting here

i was wondering if anyone was interested in anything else? im debating if i should fix the motor and sell it or part it out?

its a Red 94 Hatch
exterior- overall its clean outside, no dents in any panels just a good coat of wax and it would look like new 3 rough motegi rims 1 stock alloy (like i said i knew the kid - my guess is that it was smashed into a curb somewhere)

Interior- slightly rough tan leather that no doubt is starting to show its age but cloth front seats and pretty obvious that someone smoked in it - alot
and a broken center vent other than that its all there just a little rough

anyways ill try to get up a few pictures later but i was just wondering if anyone is interested?



****Updated Pictures****

Exterior








Interior









ok ive decided that im going to part out the car as opposed to fixing it
requests for multiple parts such as fenders will be delt with by who sent the first post or PM (i think that is the fairest way to deal with it)

ill be on later tonight to PM people about prices and shipping and everything else

thanks -Bryan

This post has been edited by CelicaB: Aug 9, 2006 - 7:37 PM

[Akimbo]

id be interested in both fenders and the bumper, pics permitting

[Theyellowdart084]

im looking for a red fender....would it still fit a 96? can PM me some pics?

[airfron]

if they work i would purchase the gas shocks that hold the hatch open

the golf club i have been using is getting me strange looks from people and even into trouble with the law one time... so... i should prolly replace them... replacements from ebay didn't work so i called my local dealer $330 a piece .. after throwing up i grabbed the old 9 iron

[trdproven]

I'll take the passenger sun visor. Gimme a price!

[eggman40]

Theres a chance i might need the plastic that surrounds the clock, radio and DIN bucket. Im gonna try and install my gauges in there, and there will be some cutting involved... If i screw it up, youll be hearing from me

[romeovaj]

PM'ed ya! need the red spoiler,driver side fender, and stock manual shifter housing if availible. thanx.

This post has been edited by romeovaj: Jun 4, 2006 - 7:17 AM

[Michelle95celica]

I need a backseat and the rear hatch interior panels that go along the sides and rear in the cargo area, are they tan or black? If they are tan, how would I go about color matching them to match my black interior? Also, how much do you want for the panels, and the backseat w/ all mounting hardware (seat and panel prices separate, them altogether if possible?) incl. shipping to 49201? Thanks!

[CelicaB]

ok i sent out a few PMs but i prefer posting everything until it gets down to adresses and stuff like that just to keep other people informed about prices for everything and whats going on

Akimbo - First in line for both fenders and bumper
Yellow Dart - Second in line for Passenger Fender
Airfron- Pm'ed
Trd Proven- Pm'ed
Romeovaj- first in line for spoiler, third in line for drivers side fender, and im not entirely sure what you mean by shifter housing if you mean the plastic directly around the shifter then you second in line if you mean from about mid dash down that whole console thing (not the arm rest console but the one in front of it) your first in line
Michelle95- the pics are up and you can decide what you want and just let me know, honestly if you need black back seats or tan interor panels i would try to find those long before i would try to dye and match panels or seats

Im going to set up my pay-pal account tonight and get with everybody on prices later

thanks -Bryan

[Willy2o9]

ok i sent out a few PMs but i prefer posting everything until it gets down to adresses and stuff like that just to keep other people informed about prices for everything and whats going on

Akimbo - First in line for both fenders and bumper
Yellow Dart - Second in line for Passenger Fender
Airfron- Pm'ed
Trd Proven- Pm'ed
Romeovaj- first in line for spoiler, third in line for drivers side fender, and im not entirely sure what you mean by shifter housing if you mean the plastic directly around the shifter then you second in line if you mean from about mid dash down that whole console thing (not the arm rest console but the one in front of it) your first in line
Michelle95- the pics are up and you can decide what you want and just let me know, honestly if you need black back seats or tan interor panels i would try to find those long before i would try to dye and match panels or seats

Im going to set up my pay-pal account tonight and get with everybody on prices later

thanks -Bryan

can i get the center consol part that the shift boot attaches to?

and also i would like the tweeter covers

also intrested in the gauge cluster

im located in Cali 95368

thanks in advance

Willy

This post has been edited by Willy2o9: Jun 4, 2006 - 5:38 PM

[SinisterWhisper]

I need the ebrake handle and also the ac unit (don't care if it work but I can't modify mine due to needing it in the car).

[jdg371]

How much for the AC control unit (HVAC?) also do you have a front strut bar?

This post has been edited by jdg371: Jun 4, 2006 - 6:11 PM

[celicurr]

wow! I wish I could find a 6gc just sitting around in a junkyard around here...

[brianforster]

do you need all of the headlights? if not i call dibs on the drivers side ones

[CelicaB]

do you need all of the headlights? if not i call dibs on the drivers side ones

sorry none of the headlights are for sale


and celicurr it was a pretty luck find being a gt and having all the parts i needed

This post has been edited by CelicaB: Jun 4, 2006 - 8:32 PM

[hitcachi]

damn dude, i totally PM'ed you about the spoiler a couple days ago...but w/e

[brianforster]

can i get that little black rubber piece that goes on top of the bumper? in between the hood and the bumper

This post has been edited by brianforster: Jun 4, 2006 - 8:45 PM

[CelicaB]

damn dude, i totally PM'ed you about the spoiler a couple days ago...but w/e

PM sent

[CelicaB]

ok i think i got everyone with a PM or a post so if i forgot you first off sorry and secondly be sure to get me a message
-Bryan

[RUNNIN-LOW]

hey i need the sunroof motor...pm sent...

[airfron]

payment sent
when you ship them can you email me with tracking #? airfron@gmail.com
thanks

-Aaron

[DeW_H0e_GT]

i want the thing thats underneath the radio..that "door"??? how much shipped to fl 32935

This post has been edited by DeW_H0e_GT: Jun 4, 2006 - 11:08 PM

[Fate]

can i get the seal for the sunroof----i dont know exactly what its called but like when you put the sun roof all the way back---there's like a bar with rubber thats screwed in and tucks under when the sunroof foes back so no rain gets in...ill take a pic because that prob. doesn't make sense.

This post has been edited by Fate: Jun 4, 2006 - 11:27 PM

[CelicaB]

Akimbo -please clean your PM box also i meant drop off not pick up

[Akimbo]

Taken care of. Gonna pass on the fenders because I think I can get some black ones from a place close to me. Not further than Medina, just black though. But thx and GL.

[CelicaB]

Taken care of. Gonna pass on the fenders because I think I can get some black ones from a place close to me. Not further than Medina, just black though. But thx and GL.

thanks man -makes sence if there in good shape id do the same thing
-bryan

[lagos]

damn man... that car is in good shape. dont part it out. just buy another used motor for 500bucks and swap it in . it would take a weekend to do and you could resell the whole car!

[CelicaB]

damn man... that car is in good shape. dont part it out. just buy another used motor for 500bucks and swap it in . it would take a weekend to do and you could resell the whole car!

i know but i picked the car up for major parts that are in good shape (doors, headlights, brakes,ect ) so by the time i was done with it i couldnt get the parts i need for the difference you know?

anyways:

Airfron - parts shipped tracking number PMed later

Clipsetuner - parts sent tracking number PMed later

Romeovaj- payment received parts sent and ill get you your number later also (ohh the screws are in ther too)

[SHERMAN]

how much for the hood and the hatch

[devilsden97]

all parts needed for a drum to disc conversion on an ST? Anyone dib those????

Pm Hurley97 about it.

[hurley97]

all parts needed for a drum to disc conversion on an ST? Anyone dib those????

Pm Hurley97 about it.

lol...thanks
heres the list i found in case your not sure
-rear calipers (not sure w/ or w/o abs)
-backplates
-internal parts for parking brake within rear rotor
-rear brake lines

i wasnt planning on doing this that soon but if the price is good i'll take the parts now, let me know. thanks

[CelicaB]

all parts needed for a drum to disc conversion on an ST? Anyone dib those????

Pm Hurley97 about it.

all parts needed for a drum to disc conversion on an ST? Anyone dib those????

Pm Hurley97 about it.

lol...thanks
heres the list i found in case your not sure
-rear calipers (not sure w/ or w/o abs)
-backplates
-internal parts for parking brake within rear rotor
-rear brake lines

i wasnt planning on doing this that soon but if the price is good i'll take the parts now, let me know. thanks

sorry guys none of that is going -part of the reason i got the car

and tracking numbers sent to:Airfron, Clipsetuner,Romeovaj
-Bryan

[Fate]

sent you PM

[XS4lv1Truch0x]

ur parting it all out?

if so, i need all the parts neccessary to convert my car to stickshift...

pm me!

btw i live in cali 90805

[Clipsetuner]

Thanks, got the PM waiting for parts to come in.

DTE

[6strngs]

I'll take the grommet from the stock air intake box if it's available! pm me with a price and shipping to CA 94550! thanks!

[CelicaB]

ur parting it all out?

if so, i need all the parts neccessary to convert my car to stickshift...

pm me!

btw i live in cali 90805

first post says im keeping all that -sorry

I'll take the grommet from the stock air intake box if it's available! pm me with a price and shipping to CA 94550! thanks!

6string you have PM

[st202gt]

what about the stock intake arm piece do u still have it?

[CilverSeliST205]

Whole glovebox, pop out plastic from around the steering wheel, gauge cluster, and the big plastic piece that connects to front windshield (along with the little plastic rectangle on top of passenger airbag) ill PM you with my offers in 20 min.

[Fate]

any word on my PMs?

[6strngs]

upon looking at the pictures again, I gotta say, damn he gets bad gas milage! 64 miles on the trip and only 2/3 of the gas left? I get 100 miles before getting to the quarter mark! (my car is also a 94 GT hatch, so it's not like we have different engines or anything)

[CelicaB]

ok sorry everyone my internet went down for a few hours i think i got everybody back with PM's if i forgot you please let me know
-bryan

[Gatz]

looking for a gas door pm sent

[brad1103]

how much would u take for the gt rim/tire

[DeW_H0e_GT]

do u have the speedometer?..the part i really want is the 2 ends...where the seatbelt, battery etc..... + the right side where it shows o/d off, fuel, check engine, etc.....pm me with a price shipped to fl 32935

[CelicaB]

all pms returned

[Fate]

delivery came in today, only took 2 days. GREAT TO DO BUSINESS WITH! thanks! A++

[AllTrac96]

price on the a/c controls. and the highbeams if somebody hasn't already called them out.

[lazarpaul]

hi.....i need the smal "box" that goes right next to the lighter(i've got a hole over there:)) and both ashtrays(or at least the one in the back).please pm me with price......my zip is 30044.Thanks.

[valerit1]

How much for the center armrest lid cover (the upper piece only - as on the picture)?
What kind of shape is it in?
Thanks!

[Supersprynt]

I need the power steering resovoir & bracket.

[shin]

bump for purchase made. complete ac lines purchased. payment sent.

[snowbunny]

pricing(pretty please) for the entire piece with the two clips that holds in the switches for the drivers side window, pass window, window lock and I belive it has the side mirror adjustment.. if you still have that piece.. thanks

shipping to Orlando, Fl 32827

[JoKeRkId613]

hey brian, got my window regulator and motor today and works great. thanks a lot for all your help. id recommend this guy to anyone, shipping was quick, he went out of his way and took pics of the parts, great communication. thanks again man.

[JonMarkos]

Purchase completed and item received, awesome doing business with you and very quick delivery. Thank you very much.

[rev_limit]

hey i am intrested in the center piece where the deck and clock gose in ... PM ...

thanks

[CelicaB]

Close please

im done parting out the car