![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) ![]() |
i was trying to change the lights of mi climate control to blue,, which i failed
![]() -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) ![]() |
those two cables on the back of climate control box...
![]() ...are you sure you plugged them back right? (one of them controls temperature..) And btw. other end of that cable is in engine bay so if you unplugged it for easier work with box, I'm sure you just forgot plug it again ![]() This post has been edited by malpaso: Dec 22, 2006 - 7:45 PM -------------------- No more replicas... This is evolution... This is SS-four :)
![]() ________[Featured Celica of 6gc.net @ 2010]_________ |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) ![]() |
i plugged them back to normal,, but after that,, the indicator will not move to the blue area (where it should give cold air),, it just stays on the red color but gives cold air,, did i put them back wrong?
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 3, '05 From USA/Virginia Currently Offline Reputation: 2 (100%) ![]() |
when i take my climate control unit out i always detach the control wires from the other end. the blue one is to the right of your accelerator, and the black one is in the engine bay.
you might want to try doing that. and then, when you re-attach them, play with your blue -> red knob moving it to it's extremes to make sure the pieces the wires are pull/pushing are letting them move where they need to go. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 5, '06 From San Luis AZ Currently Offline Reputation: 4 (100%) ![]() |
QUOTE(Zimluura @ Dec 24, 2006 - 3:52 AM) [snapback]512779[/snapback] when i take my climate control unit out i always detach the control wires from the other end. the blue one is to the right of your accelerator, and the black one is in the engine bay. you might want to try doing that. and then, when you re-attach them, play with your blue -> red knob moving it to it's extremes to make sure the pieces the wires are pull/pushing are letting them move where they need to go. Ok man, thanks,, ill try that and see if it works. i will tell you later if it work out. -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 28th, 2025 - 10:22 AM |