parts numbers, for water sensors Options

[DeW_H0e_GT]

hey guys/gals,

any1 kno the part # for the 3 sensors on top of the radiator hose?....

i desperately need one for the sensor that has 2 hose connected to it(the one farthest to the right).....somethin like this (sorry for stealin the pic hitcachi )



This post has been edited by DeW_H0e_GT: Jan 16, 2007 - 3:46 PM

[DeW_H0e_GT]

BUMP!

[malpaso]

Fine you have won . I have never posed # when I wasn't sure it's right part . This is only one "water temperature sensor (for E.F.I.)" I have found: 89422-35010



But if it's not what you wanted, no complaints please

note: sorry for this picture, its taken from 7AFE (5SFE is bellow)

This post has been edited by malpaso: Jan 18, 2007 - 4:47 AM

[6gsillyca]

That part number is for the sensor with the red/green wire comming out of it. The one closest to the intake mani.

Here is mine. Why does it look different? Can someone tell me what the 4 sensors are and their part #. Sorry for thread-jack.



This post has been edited by 6gsillyca: Jan 17, 2007 - 1:02 PM

[DeW_H0e_GT]

Fine you have won . I have never posed # when I wasn't sure it's right part . This is only one "water temperature sensor (for E.F.I.)" I have found: 89422-35010



But if it's not what you wanted, no complaints please

that part number is legit - the coolant temp sensor......

MALPASO - no..your very helpful indeed....but i need teh one thats next to it...the one with the 2 "vacuum hose attached to it with teh aqua-ish connector....liek teh pic ^^^ up there ^^^^

This post has been edited by DeW_H0e_GT: Jan 17, 2007 - 3:52 PM

[6gsillyca]

If I have time tomorrow Ill try and grab a number off the double nipple sensor for you.

[malpaso]

hope I understand you need sensor placed here (red arrow), right?



If it is, I need some name to be sure... I can't find which one it's from those drawings I have 3 parts in this area (for 5SFE):

water temperature sensor, water temperature sender and some temperature switch






I guess it's that switch what you want, however first I need to know that for sure...

[DeW_H0e_GT]

hope I understand you need sensor placed here (red arrow), right?



If it is, I need some name to be sure... I can't find which one it's from those drawings I have 3 parts in this area (for 5SFE):

water temperature sensor, water temperature sender and some temperature switch






I guess it's that switch what you want, however first I need to know that for sure...

yes the first picture with the red arrow..damn ur good......

thanks 6gsillyca.....

thats y i luv 6gc.net

[6gsillyca]

I had a quick look on mine, and I got part # 90925-05068. Im pretty sure thats what it is anyway. The number is on the actaul little plastic aqua nipple. I couldnt see the number/if there was a number on the nut part.

[DeW_H0e_GT]

thanks bro..its called a bimetal vacuum valve?....

This post has been edited by DeW_H0e_GT: Jan 19, 2007 - 1:25 AM

[Batman722]

thanks bro..its called a bimetal vacuum valve?....

yes. Here's a pic (I have to try to one up malpaso )



they're the same for ST and GT, about $45 from a dealer new

[DeW_H0e_GT]

u guys so ROCK!!!!!!!!!!!!!

[malpaso]

thanks bro..its called a bimetal vacuum valve?....

yes. Here's a pic (I have to try to one up malpaso )
...
they're the same for ST and GT, about $45 from a dealer new

At last my friend , I can't handle that all alone