![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Sep 30, '06 From Knox Vegas, Tennessee Currently Offline Reputation: 0 (0%) ![]() |
Ok so I'm driving up the interstate yesterday morning and a strong sense of deja vu overwhelms me. Actually it was the fact the my 7a blew again..For the 2nd time in less than 4 months.
The engine the replaced my original one was using a fair amount of oil. I check it approx. 3 times a week and almost everytime it is low. I was putting an extra quart a week in it. I thought perhaps it was leaking, so I put a piece of carboard under it to check for leaks, but to no avail. I guess what had happened was the piston rings were not sealing very well and it was seeping into the combustion chamber. But who knows..I'm obviously not an expert on these things. The guy that installed it isn't a toyota expert, and I'm hoping he'll make good on the crappy engine he put in my car. I had no idea how many miles it had on it, and I doubt it was compression or leakdown tested. I'm pretty much SOL because I'm just a student and I'm between jobs. I swear sometimes if I didnt have bad luck I wouldn't have any luck at all. This post has been edited by InfamousChappy: Mar 4, 2007 - 10:39 AM |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) ![]() |
that really sucks, i hope that the engine had a warranty on it and that you weren't past the warranty.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) ![]() |
take one of them apart and try to figure out the problem yourself. if nothing else you'll learn a lot in the process. I'd love to do that if I could find that kind of time
-------------------- |
![]() |
|
Enthusiast ![]() Joined Sep 30, '06 From Knox Vegas, Tennessee Currently Offline Reputation: 0 (0%) ![]() |
I dont have the the first engine..It had a broken piston rod.
The second one, which just blew, has a baseball sized hole in the front of the crank case. So I'm sure it's pretty screwed, but the first motor could be fixable. If I can find it. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 28, '04 From Houston, Texas Currently Offline Reputation: 2 (100%) ![]() |
swap
-------------------- ![]() |
![]() |
|
Enthusiast ![]() Joined Sep 30, '06 From Knox Vegas, Tennessee Currently Offline Reputation: 0 (0%) ![]() |
Yea..That's what I really wanna do. But it takes money, of which I have none.
|
![]() ![]() |
Lo-Fi Version | Time is now: September 13th, 2025 - 2:55 PM |