Engine Pics!, Post some photos of your engines! Options

[fran]

Hi brothersss.... i open this because i have some ideas for decorating my engine, but i whant to see some of your engine to get mooore and moore ideas!

Post some pictures of your engine to get some ideas!

Thx duudeees!

[LewFX]

and my fav

[njccmd2002]

is that powder coated or painted? looks nice

[Valo666]

[Jaws4God]

been through several phases... LOL







currently:

[6gcSTVT]

[Driveby]

Different stages of modification

[Valo666]

forgot to add the Coupe's engine bay.. Its not done yet, i still need to add the "neon" strut bar" and headers when i get them.

[jcbass7]

thats the most recent, started tucking everything in the bottom left corner there.. more to come eventually

[x_itchy_b_x]

[jcbass7]

holy ..... now i need to change my pants.

[ILuvMyCelica95]

forgot to add the Coupe's engine bay.. Its not done yet, i still need to add the "neon" strut bar" and headers when i get them.

how did you get the "Celica" emblem to stick on the valve cover?

omg with the p0rn!

[playr158]

john i can't look at pronz in the office come on man!

[x_itchy_b_x]

haha you guys are funny. i wish the engine was in the bay now lol.

[jcbass7]

haha you guys are funny. i wish the engine was in the bay now lol.

i wish your engine was in my bay too
[not a sexual inuendo^lol]

This post has been edited by jcbass7: Sep 17, 2007 - 10:06 AM

[KAOS]

post up the yelli celli engine... damn thats cleean.

[celica3000]

my engine
[/img]

[Valo666]

forgot to add the Coupe's engine bay.. Its not done yet, i still need to add the "neon" strut bar" and headers when i get them.

how did you get the "Celica" emblem to stick on the valve cover?

Double sided tape....it kinda melted a bit and stunk up the enginebay/car when we first had it out on the road, but its fine now.

[BLINKYxMUNKEY]

7afe. After I sell some a boat and another car, a 3sgte will be in.

[jcaron9gt4]

Picture of my 5sfte

[massbrandon]

Very clean Justin

[ILuvMyCelica95]

forgot to add the Coupe's engine bay.. Its not done yet, i still need to add the "neon" strut bar" and headers when i get them.

how did you get the "Celica" emblem to stick on the valve cover?

Double sided tape....it kinda melted a bit and stunk up the enginebay/car when we first had it out on the road, but its fine now.

yeah i was concerned about the melting that's why i asked, I looks good! I had a similar idea but idk about it yet.

[x_itchy_b_x]

JBWELD!

[jcbass7]

Picture of my 5sfte

Really clean set-up! (I'm from Gloucester, Ma) nice to see some more mass-holes on here

[jcaron9gt4]

thanks alot man..haha, and yea, we are straight up massholes lol

[1bwilson]

Thank You John! Ive been pondering where and how I would route my oil relocater settup and you answered my prayers! Although mine will face the other direction and make changing the filter a bit less messy, I hope. Oh and beautiful settup!

jcaron9gt4 - VERY clean install, has the manifold lasted that color while running for a while?

[jcaron9gt4]

Thank You John! Ive been pondering where and how I would route my oil relocater settup and you answered my prayers! Although mine will face the other direction and make changing the filter a bit less messy, I hope. Oh and beautiful settup!

jcaron9gt4 - VERY clean install, has the manifold lasted that color while running for a while?

thanks alot man. yea, the manifold has pretty much held up, as well as the turbo. My buddy did all the work and it came out awesome. He didnt bake it or anything but i think the heat of the engine baked on the color just as well. Right now its not that clean like there lol....i gotta go clean it for the CSP meet this saturday...

[1bwilson]

Give manny a run for his money! Id love to go to that meet but my car is still down and its a tad far away for me. IF I can get running and reliable I might make a cameo next year.

[jcaron9gt4]

Give manny a run for his money! Id love to go to that meet but my car is still down and its a tad far away for me. IF I can get running and reliable I might make a cameo next year.

haha....if only i could....maybe one day.

[99GT]

Picture of my 5sfte

Has been my wallpaper for awhile now.

[jcaron9gt4]

wow. i feel honored...thank you!!

[99GT]

More 3S swap pics!!!

[presure2]

my setup:


shannons setup:

[jcaron9gt4]

is her setup finished manny?

[presure2]

is her setup finished manny?

yup, just a few small details to finish up..

[GotToyota]

My (very stock) engine bay:

[94celigts]

wowo i like the all black looks sleek.

[GotToyota]

wowo i like the all black looks sleek.

Thanks. I painted all of that in the engine bay also. Couldn't take out my header heatshield so I just masked everything off and sprayed away.

-Matt

This post has been edited by GotToyota: Sep 20, 2007 - 2:32 PM

[1bwilson]

Valve cover also?

[GotToyota]

Valve cover also?

Yep, everything you see in the picture was painted in-bay. Nothing was taken off, just masked.

-Matt

[95CelicaST]

post up the yelli celli engine... damn thats cleean.

Ask... and you shall receive

Actually I haven't uploaded any of my Yelli Celi pictures yet...

[Defgeph]

[Celicav]

And I get to see this in person Saturday! I'm wet already.

[Batman722]

And I get to see this in person Saturday! I'm wet already.

wet ?

[Celicav]

And I get to see this in person Saturday! I'm wet already.

wet ?

Alright, you know what I meant lol...see ya Saturday

[BLINKYxMUNKEY]

Hmm.. Looks fantastic! Mine will look like that after I sell few big things.

[frosty]

I'm digging the extra horns in the bay!

[Valo666]

sooo simple..nice jeff.

[95CelicaST]

Is that the throttle cable going all over the place?

[CaliJeff]

looks like it.

[Batman722]

[Insanity-74]

A few changes sincew last time..now pushing in the region of 340BHP at 1.3bar (on standard internals too)

[GotToyota]

Hey there, that looks similar to mine.

-Matt

[Alan]

[CaliJeff]

.. showoff lol

[Insanity-74]

Oooooh shiny....very nice....what ignition system are you using???? I want to upgrade mine and have no idea where to start looking.

[dtlwrc]

^^This is really beatiful!!!

[frosty]

^^^^I like how the edges fade and make it shine. Almost like it's a dream or fantasy

[Alan]

Thanks Guys

as for the ignition I am using the halteck twin coil system but requires there ECU to work with;)

[GriffGirl]

forgot to add the Coupe's engine bay.. Its not done yet, i still need to add the "neon" strut bar" and headers when i get them.

how did you get the "Celica" emblem to stick on the valve cover?

Double sided tape....it kinda melted a bit and stunk up the enginebay/car when we first had it out on the road, but its fine now.

yeah i was concerned about the melting that's why i asked, I looks good! I had a similar idea but idk about it yet.

What about using RTV silicone as the adhesive? I think it'd work with the heat. Just use beads at key points to hold it down without it squishing out on the valve cover.

[Valo666]

forgot to add the Coupe's engine bay.. Its not done yet, i still need to add the "neon" strut bar" and headers when i get them.

how did you get the "Celica" emblem to stick on the valve cover?

Double sided tape....it kinda melted a bit and stunk up the enginebay/car when we first had it out on the road, but its fine now.

yeah i was concerned about the melting that's why i asked, I looks good! I had a similar idea but idk about it yet.

What about using RTV silicone as the adhesive? I think it'd work with the heat. Just use beads at key points to hold it down without it squishing out on the valve cover.

the only downside to puttin it on the valve cover after driving for 4 hours the celica badge its self melted a tiny bit. Nothing tooo noticeable..but it was fine. Im probably gonna b taking it off and gettin sarah's brother to airbrush the word celica on it.

[jcbass7]

forgot to add the Coupe's engine bay.. Its not done yet, i still need to add the "neon" strut bar" and headers when i get them.

What about just stenciling it onto the exhuast heat sheild? like possibly the celica dragon logo thing.. i think that would look awesome

[Valo666]

Jessi...you sir are a smart man..lol. I should ask her bro about that.

[x_itchy_b_x]

its a dirty, cluttered engine bay right now. just the way i like it.

[96c-oneconv]

Lets not forget about my 3rd gen, keep in mind that it's still a little dirty.

[Jared95]

super clean

[lagos]

^ bling bling

[ice23q]

dowh

This post has been edited by ice23q: Oct 3, 2007 - 2:03 AM

[frosty]

dowh

Come on now ice, lets see the 5s-gte now.

[97lestyousay]

[Paul_Celica_GT]

And off course the 3S-GE should not be missing:



Enjoy!

[Supersprynt]

[99GT]

Nice!

[C3L1CA]

If only it still looked that clean

[m0dd3d1]

That's hot, love the headers!

[presure2]

[doGGy]

My ex celica engine... Gonna miss that badboy

[1bwilson]

[lagos]

t-bolt overkill

[stetsonaw]

^^^^I like how the edges fade and make it shine. Almost like it's a dream or fantasy

that's because it's everyone's dream to have that hotness under their hood.

[Kadett]

^^^^I like how the edges fade and make it shine. Almost like it's a dream or fantasy

that's because it's everyone's dream to have that hotness under their hood.

I'd rather have a dirty engine bay with a good build 350bhp 3s-gte then a shiny one that hasn't got its oil changed in 30.000 miles. It's all a matter of perspective.

Anyways, I hope to receive my Aussie downpipe next week, so major overhaul of the engine bay will be done, with pics of course

[ILuvMyCelica95]

If only it still looked that clean

Wow i love that header

My ex celica engine... Gonna miss that badboy

damn that's pretty

[97lestyousay]

Wow i love that header

Woot someone who understands the difference between singular and plural.

[Batman722]

I put a injen-like intake on last weekend ($39 shipped) and I put a reflective 6gc.net decal on it.

flash off



flash on



flash off



flash on



and the decal peeking out from the bay





yay for me.

[6strngs]

one of how it was before...


and one of how it is now:



but it's ok, cause it's making a slow come-back. hopefully only another 2-3 weeks.

[NapTown94]

If only it still looked that clean

This is like my dream engine. Even if it is an N/A 7A. It's friggin gorgeous. diggin the chromed header like everyone else.

[celicadude04]

This post has been edited by celicadude04: Nov 9, 2007 - 4:45 PM

[6strngs]

some progress made today. installed the throttle body, injectors, valve cover, starter, cleaned up some of the wiring, and almost finished fixing the radiator fan which was broken. sorry for the crappy pic though

[ice23q]

5SGTE

[Celiracer18]

daaaanng! i love your manifolds <3

[soven]

[Jaws4God]

updated mine with a new intake, and ground wire kit..



This post has been edited by Jaws4God: Feb 16, 2008 - 10:37 PM

[Batman722]

[CelicaST_CALI]

the map is just in case u wanna study the world while working on ur car?...lol jp

This post has been edited by CelicaST_CALI: Dec 10, 2007 - 11:36 PM

[elvasoshexai]

[Rusty]

the map is just in case u wanna study the world while working on ur car?...lol jp

lol I can see NZ on the map

Be prepare for stock

[6strngs]

the map is just in case u wanna study the world while working on ur car?...lol jp

uh... yeah... doesn't everybody have a world map next to their car?

[hurley97]

old


new

[lagos]

that looks awesome steff.

[Celica-Boy]

Here's mine after spending about 15 hours washing, polishing and waxing!