Clear turn signals Options

[kerosene]

Anyone know where i can get clear turn signals for the stock bumper?

[Supersprynt]

They don't make any for your car.

[manphibian]

What are these then?


protocast.co.uk
or PM Wolfie308

[kerosene]

They don't make any for your car.

erm... your wrong, you can put GT turn signals on it

What are these then?


protocast.co.uk
or PM Wolfie308

thanks ^^

[soulshadow]

What SuperSprynt is trying to say is that They DO make it But It won't Fit our model Years. Our bumper is different and therefore unless u get a 96+ front Bumper the clear turn signals will not fit in properly.
(Ive learned from my mistake)

[eggman40]

What SuperSprynt is trying to say is that They DO make it But It won't Fit our model Years. Our bumper is different and therefore unless u get a 96+ front Bumper the clear turn signals will not fit in properly.
(Ive learned from my mistake)

x2 the 94-95 bumper has turn signals that are about half an inch shorter in length. Those wont fit. As far as a company making clears, i have no idea...

[kerosene]

so we cant have clears??? WTF??

[eggman40]

http://www.6gc.net/howto/make_your_own_clear_corners heres one option i can think of...

[xs94st]

or u can buy em from wolfie for about $350. i think thats what they go for. apart from projectors, they are a necessary item when makin your lighting look good.

[96celica25thann]

I have a set of clear turns and side markers b/n 50 shipped

[punkuup5150]

ne one know where to get the eruo style front turns? i fopund a website selling em for 25 bucks or somethign for the 96+ front end and i need a new set for my c-one front end pm me if u know a place that i can get them in a week or 2 or even stock replacements would be ok at this point

[kerosene]

I have a set of clear turns and side markers b/n 50 shipped

what year car, and what type

[manphibian]

are you guys blind?

i posted up there where to get them ^^^

www.protocast.co.uk

or PM Wolfie308.

They are the ONLY ones you can buy that fit. and xs94st they are nowhere near that expensive

[Supersprynt]

Sorry I didn't clarify. They don't make them in the states. And for $150 I think your getting slightly ripped off from Protocast and $350 is outrageous for a set of turn signals.

BTW: GT & ST turn signals are exactly the same.

This post has been edited by Supersprynt: Sep 28, 2007 - 12:11 PM

[Chucky]

what about clear side markers? where could we get some of those?

[Supersprynt]

The Parts Database is quite informative.

After taking a quick look at PCP it doesn't look like they are selling them anymore. Might be SOL on that one too.

This post has been edited by Supersprynt: Sep 28, 2007 - 12:49 PM

[kerosene]

nah im going to have em next week ^^ ill take pics...

[manphibian]

Sorry I didn't clarify. They don't make them in the states. And for $150 I think your getting slightly ripped off from Protocast and $350 is outrageous for a set of turn signals.

BTW: GT & ST turn signals are exactly the same.

Wolfie308 IS protocast. And they're hand made, not mass produced mouldings, that's how much it costs to make things like that.

that guy just made up the $350 rubbish.

[Supersprynt]

Oh I didn't know it was the same dude. Glad to hear they aren't 350. But IMO 150 for turn signals is crazy. Glad I have 96 bumper

[manphibian]

Oh I didn't know it was the same dude. Glad to hear they aren't 350. But IMO 150 for turn signals is crazy. Glad I have 96 bumper

Yeah, it's almost cheaper to just replace the whole bumper

[wolfie308]

Oh I didn't know it was the same dude. Glad to hear they aren't 350. But IMO 150 for turn signals is crazy. Glad I have 96 bumper

Yeah, it's almost cheaper to just replace the whole bumper

Only just seen this thread

As Manphibian has tried to tell you, I am THE only person making OEM style/quality replacement lenses for the pre face lift ST/GT modelS which will give a perfect fit. The lenses are easily refitted to your original stock backings.

Price is the price as they're individually hand cast, using the highest grade(expensive) industrial materials. It's not quite the same as casting garden ornaments or paperweights

If they were the same price in $'s as £'s, I'm sure they'd sell like hot cakes, so sales are mostly to U.K and Europe. Although there are a few guys on here with them fitted too

Oh and before someone asks, the actual price is £67.50 GBP delivered inc bulbs

[cyberrick]

wolfie your inbox is full


How much are they? shipped to 91911 california

Celica GT Gen 6 '94-96' clear indicators. Thanks.

[wolfie308]

wolfie your inbox is full


How much are they? shipped to 91911 california

Celica GT Gen 6 '94-96' clear indicators. Thanks.

As stated in my previous post, shipped to your door price is £67.50 GBP inc amber bulbs.

Available from stock

If you'd like to order,payment can be made by Payal to.... richardmarsden@freeuk.com

[GriffGirl]

wolfie your inbox is full


How much are they? shipped to 91911 california

Celica GT Gen 6 '94-96' clear indicators. Thanks.

As stated in my previous post, shipped to your door price is £67.50 GBP inc amber bulbs.

Available from stock

If you'd like to order,payment can be made by Payal to.... richardmarsden@freeuk.com

That's $167.55 (as of this minute) to us Americans...

[wolfie308]

wolfie your inbox is full


How much are they? shipped to 91911 california

Celica GT Gen 6 '94-96' clear indicators. Thanks.

As stated in my previous post, shipped to your door price is £67.50 GBP inc amber bulbs.

Available from stock

If you'd like to order,payment can be made by Payal to.... richardmarsden@freeuk.com

That's $167.55 (as of this minute) to us Americans...

Not sure how you're calculating your exchange rate, but if you check www.xe.com they're quoting $2.04/ £1.

This is the interbank rate(I used to be a currency broker) if you allow 7% margin, you should be looking at a 'tourist' rate of about $2.18 making them closer to $147.

Of course they're still expensive, hand made to this quality, they always will be. Wierd huh? and the materials I use are imported from the U.S If was manufacturing over there, I'd probably be charging my £'s prices in $'s........but I'm not. Just think, we're paying £1 per litre for petrol

[kerosene]

or you can take 5th gen lights, and fit em into your car... my car is proof that its possible... Illneversellmycelica is the other proof.... 40 bucks and you can have clears...

[GriffGirl]

I just googled currency exchange and used a calculator from that...

actually XE.com is the one I used, it was the first to pop up on the list...

Now it's saying $137.73. That's why I said "at of this minute" because it'll fluctuate depending on what the stock market is doing and just how crappy the dollar is at any given moment according to the crap that flies out of Dubya's mouth...

This post has been edited by GriffGirl: Oct 17, 2007 - 4:44 PM

[illneversellmyce...]

yeah and they look great. their are many methods to put them on, their only a half inch off from the screw point. kersone used plastic and arcyllic. I fabricated a sheet metal bracket, used sum washers and bolts, snug as a bug, aint going anywhere.

for refrence I have a 1994 st with an invader front bumper

[kerosene]

yeah and they look great. their are many methods to put them on, their only a half inch off from the screw point. kersone used plastic and arcyllic. I fabricated a sheet metal bracket, used sum washers and bolts, snug as a bug, aint going anywhere.

for refrence I have a 1994 st with an invader front bumper

Looks awsome m8... ^^ but ive told you that already...

btw, mine look similar except stock 94 bumper... i can pull pics if you want to see

[lazarpaul]

Yeah man.....please post some.......I'm really interested in getting them.
And also, where'd u buy'em from?

This post has been edited by lazarpaul: Oct 21, 2007 - 5:37 PM

[kerosene]

actually, nick (illneversellmycelli) found them, I was the test victim of us 2...lol... ebay...

CODE

http://cgi.ebay.com/ebaymotors/90-93-TOYOTA-CELICA-CLEAR-BUMPER-SIGNAL-LIGHTS-LAMPS-92_W0QQitemZ160168921426QQihZ006QQcategoryZ33717QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

and as far as my pics go...got them on photobucket, on the picture they are different they are now... mine are acrylic in the area where theres a little hole... so theres no bumper showing and the lights are even...

CODE

http://s228.photobucket.com/albums/ee282/keroseneman/

[lazarpaul]

any way you could post some pics of what they look like now?

This post has been edited by lazarpaul: Oct 21, 2007 - 7:00 PM

[kerosene]

no there isn't i took apart my bumper yesetrdaym along with lights, and everything else... so cant...

[lazarpaul]

how's that acrilic workin'?

[kerosene]

it's good, if you know what you are doing... took me about 3 hrs of playing with it before i got it completely right... lot and lot of work, especially to make it look correct... you can do it a "lazy" way... I've been thinking about mass fabricating the mount i made, depends if i feel like it and if i get some more acrylic...

[Valcor]

So where can you get clear markers for 97 euro models?

[kerosene]

ebay