 I'm making my own custom LED tails..video too, in the process of making my LED tails |
 Aug 16, 2011 - 5:36 PM
|
 
|
 Enthusiast  Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%)  |
I just finished making one LED light board and I put up a video on youtube comparing the LED lights to the regular bulb. Right now I only have the brake/running light for one side of one tail light, I still have to make 3 others for the brake/running lights as well as two turn signal ones and back-up light boards. I'm still waiting on my large circuitboards to come in the mail so I can make the turn signals.
If you watch the video, please keep in mind that here it's a bright Hawaiian sunny day, and there is a lot of glare off of the tail light lens. It's a fun project  http://www.youtube.com/watch?v=pobppYRb1Vg -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
 |
Replies
(1 - 6)
|
Aug 17, 2011 - 12:55 AM
|
|
|
Enthusiast Joined Aug 16, '11 From Australia, Vic, Portland Currently Offline Reputation: 0 (0%) |
Looking good dude should post up a how to forum once your done.. Wouldn't mind doing this my self.
|
|
Aug 17, 2011 - 1:31 AM
|
|
|
Enthusiast Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) |
hey, your name is kane? I thought you were local hawaiian for a second. Kane is a hawaiian name meaning "man"
-------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
|
Aug 22, 2011 - 10:19 AM
|
|
|
Enthusiast Joined Aug 16, '11 From Australia, Vic, Portland Currently Offline Reputation: 0 (0%) |
QUOTE (match220 @ Aug 17, 2011 - 1:31 AM)  hey, your name is kane? I thought you were local hawaiian for a second. Kane is a hawaiian name meaning "man" hahah wow really? Learn something everyday, I was told my name meant radiant haha.. I'm no Hawaiian mate, I'm Aussie =) |
|
Aug 23, 2011 - 2:23 AM
|
|
 Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
nice!
here is a led conversion on the hatchback tailights. these are for sale on nengun, current bid is around $400. 
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
|
Aug 23, 2011 - 2:59 AM
|
|
 Enthusiast Joined Feb 3, '06 From Czech Republic (Europe) Currently Offline Reputation: 56 (100%) |
check another design
 
-------------------- No more replicas... This is evolution... This is SS-four :)
 ________[Featured Celica of 6gc.net @ 2010]_________ |
|
Aug 23, 2011 - 3:39 AM
|
|
|
Enthusiast Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) |
wow, those are awesome. I like the first ones better, but the second ones would be nice too with just a couple straight strips of LEDs for the running lights and then two or three on the bottom for the brake lights. Maybe I could redesign mine. I would like full LEDs across even replacing the stock reflector on the coupe tails.
I really wish the convertibles had hatchback tails. -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 19th, 2025 - 4:13 PM |