Snow White, Latest mod: Wifi controlled LED cluster. And pods Options

[The_enD]

Hello my name is Teo and this is my Celica. My focus is on audio and interior/exterior changes. Hope you enjoy.
7a-fe running on LPG, the rims are 16" OZ Superleggeras





I found a suitable hole to run the 0ga through the passengers side firewall. But my battery is on the drivers side. As I knew I will be upgrading my stock wire I decided to avoid running such a thick wire across the engine bay and connect it straight to the alternator. One little thing- the alternator positive bolt was a little bit short for the ring terminals at the same time. Went and bought this "tube" that is threaded on the inside.
Terminal for 0ga, washer, "tube" thingy, 5ga going from alternator + to battery +


Back seats be gone!


Falls floor done with multiple pieces to save on material. Practically zero spend on it.


Carpet


The box - 1.75 cub feet, kerfed port @ 32, 1.5 inch plywood walls
















Port painted in white satin


1.75 walls






Bad ass terminals






Sub - Sundown Audio SA-12 , Amp SAZ-1500D




This post has been edited by The_enD: Jun 26, 2014 - 4:18 AM

[The_enD]

Each door will have a single 10" Neopro in a ported plywood enclosure tuned to around 60Hz. Adding fiberglass for even more strength.

Plywood

Door inner cover and front baffle for the enclosure.




Flushed driver




Big hole for the enclosure. Door will be covered in suede.


Port


Assembly






The flush weakened the baffle, so I added two pieces at the back of it for strength.


After the glue dries I will cut it out again.


Attention to details. Even tho it won't make a significant difference the piece was rounded over.
This piece is kinda of a brake point for the to separate, so called sections of the enclosure.


And the round over is here


8 clamps and left to dry.










Cut them up to save some space in the front by doing some relocations.


Glued back on


Fiberglassed the original panel to the ported enclosures




Covered some parts of the wood and fiberglass with foam for a softer feel when I cover them up.


Rice


Old and ugly gear ball


New