Snow White, Latest mod: Wifi controlled LED cluster. And pods Options

[The_enD]

Hello my name is Teo and this is my Celica. My focus is on audio and interior/exterior changes. Hope you enjoy.
7a-fe running on LPG, the rims are 16" OZ Superleggeras





I found a suitable hole to run the 0ga through the passengers side firewall. But my battery is on the drivers side. As I knew I will be upgrading my stock wire I decided to avoid running such a thick wire across the engine bay and connect it straight to the alternator. One little thing- the alternator positive bolt was a little bit short for the ring terminals at the same time. Went and bought this "tube" that is threaded on the inside.
Terminal for 0ga, washer, "tube" thingy, 5ga going from alternator + to battery +


Back seats be gone!


Falls floor done with multiple pieces to save on material. Practically zero spend on it.


Carpet


The box - 1.75 cub feet, kerfed port @ 32, 1.5 inch plywood walls
















Port painted in white satin


1.75 walls






Bad ass terminals






Sub - Sundown Audio SA-12 , Amp SAZ-1500D




This post has been edited by The_enD: Jun 26, 2014 - 4:18 AM

[The_enD]

I bought the car with the original steering replaced with a MOMO RACE and decided to keep it. The leather was in bad shape tho so:

Test piece


Before






What happens when your hands are slightly wet -_-



Making holes, no thread in the needle


First piece done


Making a pattern for the more complex shapes


Connection stitch with black thread. It will be will be touched more, and if it was white, after a while it was bound to get dirty.






The finished product of my imagination












Overall I am very please with the result. It took me around 20-24 hours of hand work, measuring, cutting, using the sewing machine, making patterns, failures, stitching.

Used : white and black polyester thread, real leather from some dead animal, scissors, shaving blade, 3 needles, glue.
*optional : patience, good taste, the internet