 Black top head on a red top beams? |
 Apr 23, 2013 - 2:12 AM
|
 
|
 Enthusiast  Joined Jan 8, '13 From New Zealand Currently Offline Reputation: 0 (0%)  |
Does anyone know if this is possible or has been done before?
Not saying I want to do it this was just a drunken idea the other night  Would be cool running the dual vvti though, and you can find the heads reasonably cheap here in NZ Had a quick look but didn't see anything obvious but could be using man eyes haha Have also heard you can modify 4age itb's to fit the 3sge? -------------------- QUOTE (madbeardo @ Mar 27, 2013 - 8:17 PM)
When said about modification I didn't mean the ones made by man. What I said was that it might have modified after being affected by a certain force. |
 |
Replies
|
Apr 29, 2013 - 4:08 PM
|
|
 Moderator Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) |
it is possible to put a blacktop head on a redtop. however fitting it into a ST20# celica is another mission, due to
more room required for the vvti camgears, which would go into the strut tower and engine mount customised the wiring so you can run the ex. vvti oil drain from the head as the redtop is on an angle the blacktop is straight there are no gains from swapping the cams over as they are apparently the same size which are IN. 226@ .50"/1mm, EX. 222 @ .50"/1mm its not a very cost effective move, best to look into a stand alone ecu + tuning, but even then your looking at the range of 3-5,000 NZD most likely. There is an auusie guy Glenn Booth who makes itbs for the beams, but I think your looking at around the 3,000NZD mark? -------------------- |
Posts in this topic
Mo_tron Black top head on a red top beams? Apr 23, 2013 - 2:12 AM
Mo_tron Ah, so you couldn't swap the black top exhaust... Apr 29, 2013 - 10:29 PM BonzaiCelica Go to the beams section of the mr2 forum boards. I... Apr 30, 2013 - 2:47 AM Rusty well if the camshafts are technically the same spe... Apr 30, 2013 - 4:57 AM BonzaiCelica haha hey now no picking on me although it's tr... Apr 30, 2013 - 12:14 PM Mo_tron Haha thanks guys, looks like I have a little more ... Apr 30, 2013 - 4:48 PM
richee3 QUOTE (Mo_tron @ Apr 30, 2013 - 4:48... Apr 30, 2013 - 5:02 PM Mo_tron Aw man
Thanks for the heads up though I was abou... Apr 30, 2013 - 5:34 PM richee3 You could get the SARD Sports+ intake and build a ... Apr 30, 2013 - 5:41 PM Mo_tron So leave the stock piping? Or can I put the MAF in... Apr 30, 2013 - 8:30 PM Rusty Thanks, that thread is a good read. Yes I'm ru... May 1, 2013 - 2:55 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 7:18 AM |