 Red Top Beams cold start issue, im having a bit of a problem any ideas guys? |
 Nov 25, 2013 - 12:11 AM
|
 
|
 Enthusiast  Joined Mar 5, '12 From Sacramento Currently Offline Reputation: 3 (100%)  |
Seems like the problem wont go away upon cold start this happens it starts yet idles low i gotta push the gas to at least 2k for about 35 seconds
(sorry for text message ringtone)  and it begins dropping low to about 300 and my car begins to rattle ALOT.  but once the engine is all warmed up it idles here and everything goes back to normal.(same vid posted from previous post)  this coldstart is becoming an issue now any ideas guys? --------------------  |
 |
Replies
|
Nov 25, 2013 - 8:42 AM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
I know a lot of 7A guys that have this problem too. Check the resistance of the engine coolant temp sensor (2 wire) against specs when it's cold out. I did a lot and never fixed mine, but I also never checked/replaced the sensor. I replaced the IAC and cleaned the throttle multiple times, even reset the throttle zero position to account for wear. No dice. Does the exhaust smell super rich when it's running ****ty without help?
-------------------- |
|
Nov 26, 2013 - 1:02 AM
|
|
|
Enthusiast Joined Mar 5, '12 From Sacramento Currently Offline Reputation: 3 (100%) |
yea it kind of does and ive cleaned the iscv as well as the throttle body and the maf checked the hoses no leaks and to top it of i got no CEL so i honestly dont know what more to do and i dont wanna go around buying parts that wont solve the problem.so im running out of ideas of what may be causing this.
-------------------- |
Posts in this topic
1soljaslim5 Red Top Beams cold start issue Nov 25, 2013 - 12:11 AM
richee3 You said you reset the ECU after you fixed the ISC... Nov 26, 2013 - 4:43 AM
1soljaslim5 Yes at first i thought i had a bad iscv so i repla... Nov 26, 2013 - 2:24 PM Bitter Check the resistance of the ECT against specs and ... Nov 26, 2013 - 7:29 PM richee3 I've been putting some thought into this and I... Nov 29, 2013 - 1:27 PM Bitter It doesn't ignore ALL sensors, it ignores the ... Nov 29, 2013 - 8:04 PM 1soljaslim5 Well after many days of trying to sort the problem... Dec 4, 2013 - 2:24 AM richee3 I'd replace that sucker. Sounds like Bitter na... Dec 4, 2013 - 2:46 AM 1soljaslim5 QUOTE (richee3 @ Dec 4, 2013 - 2:46 ... Dec 4, 2013 - 3:14 AM richee3 Any Toyota dealership will have it. Part number is... Dec 4, 2013 - 3:34 AM 1soljaslim5 QUOTE (richee3 @ Dec 4, 2013 - 4:34 ... Dec 4, 2013 - 3:38 AM 1soljaslim5 So with all the time and money ive spent im still ... Dec 12, 2013 - 1:13 AM richee3 That's a VSV on the intake elbow. It just lets... Dec 12, 2013 - 1:33 AM KAOS QUOTE (richee3 @ Dec 12, 2013 - 12:3... Jul 23, 2014 - 3:03 PM njccmd2002 i mounted mine on the firewall, with a piece of al... Dec 12, 2013 - 2:27 AM njccmd2002 ok a little bit more into TOYODIY, I came up with... Dec 12, 2013 - 2:40 AM 1soljaslim5 cool thanks man but hmmmm well guess ill keep tryi... Dec 12, 2013 - 3:01 AM njccmd2002 lol, yes u need a stock box.. vincent doggy, and ... Dec 12, 2013 - 3:18 AM richee3 Unrelated to the cold start issue, what is your cu... Dec 12, 2013 - 4:06 AM 1soljaslim5 As far as exhaust set up i got the b pipe then the... Dec 12, 2013 - 5:10 PM richee3 Check your vac lines to see if they are hooked up ... Dec 12, 2013 - 5:22 PM 1soljaslim5 yes i did and still i had the same issues and i ev... Dec 12, 2013 - 5:33 PM 1soljaslim5 just ordered the airbox so now i wait it out and ... Dec 13, 2013 - 9:57 PM 1soljaslim5 bump Dec 16, 2013 - 6:10 PM Batman722 why are you bumping ?
Do you have the stock airbox... Dec 16, 2013 - 7:53 PM 1soljaslim5 well i bumped just for my thread to get it looked... Dec 16, 2013 - 8:55 PM 1soljaslim5 So After long awaited weeks look what i got from ... Dec 27, 2013 - 11:25 PM njccmd2002 and here one more example how finicky the beams is... Dec 28, 2013 - 12:06 AM richee3 Yet another testament to the OEM intake. You can r... Dec 28, 2013 - 12:16 AM 1soljaslim5 QUOTE (richee3 @ Dec 28, 2013 - 1:16... Dec 28, 2013 - 12:23 AM 1soljaslim5 im trying to upload a vid of how it is now with th... Dec 28, 2013 - 12:16 AM 1soljaslim5 Heres a vid of how the car preforms with the oem a... Dec 28, 2013 - 4:33 AM Batman722 I still think your IAC is dirty or going.
It's... Dec 28, 2013 - 9:22 AM 1soljaslim5 QUOTE (Batman722 @ Dec 28, 2013 - 9... Dec 28, 2013 - 2:38 PM Bitter The issue is that the stock airbox likely has some... Dec 28, 2013 - 11:12 AM Batman722 an entire magnaflow exhaust or just a muffler ?
Wh... Dec 28, 2013 - 3:30 PM 1soljaslim5 QUOTE (Batman722 @ Dec 28, 2013 - 3... Dec 28, 2013 - 5:00 PM lagos During a cold start, two things need to happen.
1... Dec 28, 2013 - 3:57 PM 1soljaslim5 QUOTE (lagos @ Dec 28, 2013 - 4:57 P... Dec 28, 2013 - 7:21 PM richee3 It seems a little redundant but have you checked f... Dec 28, 2013 - 5:15 PM 1soljaslim5 QUOTE (richee3 @ Dec 28, 2013 - 6:15... Dec 28, 2013 - 6:09 PM richee3 Constant flashing means no codes, but just because... Dec 28, 2013 - 7:39 PM 1soljaslim5 Well heres what i have narrowed it down to
ive che... Jan 28, 2014 - 8:44 PM njccmd2002 O2 sensor? My car did that when i forgot to conec... Jan 28, 2014 - 9:00 PM 1soljaslim5 QUOTE (njccmd2002 @ Jan 28, 2014 - 9... Jan 28, 2014 - 9:09 PM 1soljaslim5 Still having the same issues ive been driving the ... Feb 20, 2014 - 5:38 PM 1soljaslim5 Its been a while since i posted about my beams iss... Mar 9, 2014 - 8:58 PM 1soljaslim5 So today i had another problem with my car i drove... Mar 21, 2014 - 10:24 PM 1soljaslim5 First i want to say thank you to everyone here in ... Apr 19, 2014 - 11:09 PM Batman722 Glad to hear it's resolved. Apr 19, 2014 - 11:16 PM njccmd2002 woo hoo... so now enjoy that bastard!! Apr 20, 2014 - 3:23 PM 1soljaslim5 QUOTE (njccmd2002 @ Apr 20, 2014 - 4... Apr 21, 2014 - 1:27 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 12th, 2025 - 12:57 AM |