![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Mar 1, '10 From TX Currently Offline Reputation: 16 (90%) ![]() |
Sorry if its been covered before i did not see it in searches, but i have a question for any of you that have used the awd tranmission in your swaps. once you get it bolted to the motor can you drive it with out the propshaft and rear diff? my understanding is its gonna split 50/50 between the front and rear so i'm a bit concerned of burning it out with no load from the rear. is there a way to lock out the center diff and use it in a FWD configuration? Can someone confirm one way or the other? i'de like to drvie it to a friends lift but he's about 150 miles away
thanks -jec This post has been edited by JasonTX: Jan 14, 2014 - 1:03 PM -------------------- JN 3:16
-------------------------------------- |
![]() |
![]() |
|
Enthusiast Joined Sep 27, '12 From Athens, Greece Currently Offline Reputation: 0 (0%) ![]() |
This might sound like a daft question, but I might be excused for being a novice...: What gearbox/transmission do FWD swapped-3SGTE celicas ST use? The standard ST isn't strong enough, the AWD box needs the center diff welded or it won't work, so is there something that will work easily? Thanks, M. After a little search, it seems that the proper way to do things would be to swap the 2.0 or 2.2 box in. Apparently it can take the extra power and torque. Now, on the basis that the 3SGTE can be made to work, does this not mean that you can (rather) easlily make a FWD or AWD celica RWD (with the propshaft and rear dif)? I wonder if anyone has done this... M. |
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 6:06 PM |