![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Mar 5, '12 From Sacramento Currently Offline Reputation: 3 (100%) ![]() |
Seems like the problem wont go away upon cold start this happens it starts yet idles low i gotta push the gas to at least 2k for about 35 seconds
(sorry for text message ringtone) ![]() and it begins dropping low to about 300 and my car begins to rattle ALOT. ![]() but once the engine is all warmed up it idles here and everything goes back to normal.(same vid posted from previous post) ![]() this coldstart is becoming an issue now any ideas guys? -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Mar 5, '12 From Sacramento Currently Offline Reputation: 3 (100%) ![]() |
Its been a while since i posted about my beams issue and here i am to annoy you guys again sorry by the way but well after going through my checklist changing part after part it narrowed down to either wiring maybe something isnt grounded properly not sure yet and coolant temp sensor after reading through multiple sites on the web of cars with similar issues to my car's symptoms then i found this link http://answers.yahoo.com/question/index?qi...03092418AAQXyrS
which based on what i read i makes sense and just today i took out my coolant temp sensor last time i got one from a toyota echo 2001 and all it did was give a higher temp reading on the gauge but well anyways attempting to try a different sensor. well i took out the old sensor and noticed this ![]() ![]() looks like the edges are corroded so i got a replacement part from autozone and picked up a temp sensor from a tercel 98 so waiting on my engine to cool down and begin the testing again hopefully now ill finally find the solution to my problem so crossing my fingers here. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 2:32 PM |