![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 7, '07 From Corpus Christi, TX Currently Offline Reputation: 7 (100%) ![]() |
Ok guys need some help with the dreaded code 54 maybe if thats whats causing the issue. I know my IC water pump is the cause being its not the factory pump and wired directly to the acc. More importantly, I went through alot of the threads I cant find how to fix the issue given my situation. I had a basic understanding of it till.....BAM I noticed all my wires in the harness and IC water pump relay are completely different colors than stated on the threads. Keep in mind this is a 3rd gen 3sgte. So what do I do now? Its irritating not being able to boost or rev past 4k rpm.
Everytime I rev past or even reach 4k it lags like as if it hits a govenor and jerks really bad. Not sure if this is caused by code 54 or not. And when I mash on the gas it hesitates for a minute, and almost stalls then BAM!!!! Im flying down the street. What could cause this? I have brand new injectors, pump, filter, plugs, wires, and with both boost settings (A)10psi (B) 12psi -------------------- From Japan to Texas my st202 follows me.
![]() Being different from every angle of the word, leading the Revolution (TOYOTA NATION) The RHD st202 that made it from Japan check it out. http://www.6gc.net/forums/index.php?showtopic=78103 |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
Is code 54 your only code? I had a code 54 after my swap, but it was because I went to a FMIC. All limp mode did from my experience, and all the threads I went through is just not allowing boost to build. Hit about 1lbs and sit there.
Thats real strange if its the only code you are throwing, seems like a lot more could be wrong. I never had the W2A setup, so I dont know what its like with the wiring, but if you go to a FMIC and cut all that out I have a thread with the wiring to kick that code 54 in the face ![]() My code 54 wiring (last post) took me a long time to sift through all the threads that gave me like have the wiring. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: August 21st, 2025 - 7:16 PM |