Pictures of my custom work for Celicas, LED conversions, Gauge pods, Fiberglass work Options

[The_enD]

I no longer do LED conversions, doing your cluster or instructions how to DIY won't happen, sorry. I use LED strips, glue and solder it all inside the cluster, nothing complex.
In this thread I'll mainly post my work, hope you guys enjoy it.

I received this WRC ST205 speedometer for a 20 color LED conversion, red needles and redline. Comes with a simple remote to control the lights. It will also get my modified bezel with pods.













This post has been edited by The_enD: Sep 11, 2014 - 6:43 AM

[BonzaiCelica]

watch this. when he starts to get into 5,800 rpm and gauges turn red so you can prepare to shift i think if you can replicate something like this then awesome

http://www.youtube.com/watch?v=cCDm1K6sCmk

This post has been edited by BonzaiCelica: May 8, 2014 - 8:07 PM

[match220]

watch this. when he starts to get into 5,800 rpm and gauges turn red so you can prepare to shift i think if you can replicate something like this then awesome

http://www.youtube.com/watch?v=cCDm1K6sCmk

this wouldn't be that hard to set up actually, mounting a shift light inside the cluster. What would be cool though is having a dual filament 194 bulb behind the RPM cluster and using it as a shift light. I'm not sure if a 168/194 bulb exists that is dual filament, would need a different fixture to hold the bulb also. Or you could tie into the whole gauge cluster illumination circuit on either ground or positive since the circuit is isolated from the rest of the gauges. Install a flicker system to make the lights flash rapidly when ready to shift.