Jul 23, 2014 - 1:05 AM
|
|
|
Enthusiast Joined Aug 30, '13 From vinton, ohio Currently Offline Reputation: 0 (0%) |
This post has been edited by Wraithner1: Jul 23, 2014 - 9:36 PM |
![]() |
Aug 20, 2014 - 9:13 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Dec 3, '13 From Missourah Currently Offline Reputation: 0 (0%) |
getting shocked could be because of bad plug wires, so you did good to change those.
Have you checked to see if the computer has recorded any diagnostic trouble codes? and if when you said "distributor" you meant to say that the Starter was running non-stop (but if that were the case your starter would sure be dead by now), but maybe you have a problem in the starter relay or ignition switch. This post has been edited by VavAlephVav: Aug 20, 2014 - 9:17 PM -------------------- Bust a Deal; Face the Wheel.
|
Wraithner1 im officially lost (possible distributor or ignition relay issue) Jul 23, 2014 - 1:05 AM
njccmd2002 You may have a short somewhere. Check all the wir... Jul 23, 2014 - 5:26 AM
Smaay your description makes no sense. "distributo... Jul 23, 2014 - 11:09 AM
Wraithner1 QUOTE (Smaay @ Jul 23, 2014 - 11:09 ... Jul 23, 2014 - 9:35 PM
Wraithner1 so i replaced the icm and that got rid of the batt... Aug 20, 2014 - 6:01 PM
Wraithner1 QUOTE (VavAlephVav @ Aug 20, 2014 - 9... Aug 20, 2014 - 10:32 PM
VavAlephVav Hmmm, mine is odb1 so I'm not sure, but on min... Aug 21, 2014 - 12:10 PM
VavAlephVav also I've found out that you can use your lapt... Aug 22, 2014 - 6:36 AM
Wraithner1 well turns out part of the problem was that the gr... Aug 30, 2014 - 12:51 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 1:19 AM |