 3sgte 2inch dual exhaust? |
 Oct 15, 2014 - 2:18 PM
|
 
|
|
Enthusiast  Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%)  |
Gonna be swapping very soon, already have EVERYTHING except the engine itself which ill be getting in the next 2 or 3 weeks.
my car is lowered (slammed) and I only have about 3 inches of clearance under car. Im thinking of moving the cats up towards the front or just deleting them, and then doing 3 inch exhaust tucked into the driveshaft tunnel that goes to a y pipe that splits up into 2 inch dual exhaust for the back half of the car, that way I can go over the rear suspension and have 2 small mufflers that won't get torn off if I hit a bump. Your thoughts? -------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM)  I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
 |
Replies
|
Oct 16, 2014 - 12:20 PM
|
|
 Enthusiast Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) |
you do realize that the turbo it self is a restriction. even if it was a straight pipe it wouldn't be all that loud, plus back pressure on a boosted car is a big deal. its nothing like a n/a car, the turbo needs to exhaust the gasses as easily as it takes air in other wise your thoughts of ''boosting your balls off'' will not work.. and if your looking for people with knowledge, this site if full of great people with a lot of experience and knowledge.
This post has been edited by 4-eyed-freek: Oct 16, 2014 - 1:43 PM -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
 Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
|
Oct 16, 2014 - 3:05 PM
|
|
|
Enthusiast Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%) |
QUOTE (4-eyed-freek @ Oct 16, 2014 - 12:20 PM) you do realize that the turbo it self is a restriction. even if it was a straight pipe it wouldn't be all that loud, plus back pressure on a boosted car is a big deal. its nothing like a n/a car, the turbo needs to exhaust the gasses as easily as it takes air in other wise your thoughts of ''boosting your balls off'' will not work.. and if your looking for people with knowledge, this site if full of great people with a lot of experience and knowledge. Yes I understand all of that but im gonna have a 3 inch exhaust that split up into dual 2.25. If anything dual 2.25 is more free flowing that a single 3 inch -------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM) I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
Posts in this topic
Arturio55 3sgte 2inch dual exhaust? Oct 15, 2014 - 2:18 PM
4-eyed-freek If your not concerned about hp gains then i wouldn... Oct 15, 2014 - 2:22 PM cardshark525 A single 3 inch from what I've read online is ... Oct 15, 2014 - 8:05 PM
Arturio55 QUOTE (cardshark525 @ Oct 15, 2014 - 8... Oct 15, 2014 - 9:57 PM Arturio55 That article says dual 2.25 inches can support up ... Oct 15, 2014 - 10:05 PM mgnt232 Another option I think that could be good for your... Oct 16, 2014 - 1:21 AM Arturio55 QUOTE (mgnt232 @ Oct 16, 2014 - 1:21... Oct 16, 2014 - 2:28 AM mgnt232 QUOTE (Arturio55 @ Oct 16, 2014 - 3... Oct 16, 2014 - 3:44 AM Arturio55 QUOTE (mgnt232 @ Oct 16, 2014 - 3:44... Oct 16, 2014 - 11:36 AM 4-eyed-freek Yeah it will flow well, but if you were to do a 2i... Oct 16, 2014 - 3:23 PM Arturio55 QUOTE (4-eyed-freek @ Oct 16, 2014 ... Oct 16, 2014 - 3:31 PM 4-eyed-freek I get that your car is slammed, and the fact that ... Oct 16, 2014 - 3:36 PM Arturio55 QUOTE (4-eyed-freek @ Oct 16, 2014 ... Oct 16, 2014 - 3:40 PM 4-eyed-freek i know your car is much lower lol the gt4 runs the... Oct 16, 2014 - 3:46 PM Arturio55 QUOTE (4-eyed-freek @ Oct 16, 2014 ... Oct 16, 2014 - 4:05 PM mgnt232 QUOTE (Arturio55 @ Oct 16, 2014 - 4... Oct 16, 2014 - 10:10 PM Arturio55 QUOTE (mgnt232 @ Oct 16, 2014 - 10:1... Oct 17, 2014 - 1:25 AM 4-eyed-freek sorry i never got around to getting those pictures... Oct 17, 2014 - 11:08 AM Arturio55 QUOTE (4-eyed-freek @ Oct 17, 2014 ... Oct 17, 2014 - 1:03 PM 4-eyed-freek the car is now a 1/5 lower than this picture with ... Oct 17, 2014 - 11:19 AM Arturio55 QUOTE (4-eyed-freek @ Oct 17, 2014 ... Oct 17, 2014 - 1:19 PM Malek I literally have no space between the body and the... Oct 17, 2014 - 1:19 PM Arturio55 QUOTE (Malek @ Oct 17, 2014 - 1:19 P... Oct 17, 2014 - 1:24 PM 4-eyed-freek they are 18's Oct 17, 2014 - 2:27 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 24th, 2025 - 12:22 AM |