3sgte 2inch dual exhaust? Options

[Arturio55]

Gonna be swapping very soon, already have EVERYTHING except the engine itself which ill be getting in the next 2 or 3 weeks.
my car is lowered (slammed) and I only have about 3 inches of clearance under car. Im thinking of moving the cats up towards the front or just deleting them, and then doing 3 inch exhaust tucked into the driveshaft tunnel that goes to a y pipe that splits up into 2 inch dual exhaust for the back half of the car, that way I can go over the rear suspension and have 2 small mufflers that won't get torn off if I hit a bump.

Your thoughts?

[4-eyed-freek]

i know your car is much lower lol the gt4 runs the exhaust along the drive shaft half way tucked in the drive shaft well. its a 3in hks high power exhaust. it was already on the car when i got it. i will email you some pics after work.

[Arturio55]

i know your car is much lower lol the gt4 runs the exhaust along the drive shaft half way tucked in the drive shaft well. its a 3in hks high power exhaust. it was already on the car when i got it. i will email you some pics after work.

much appreciated. For reference, I put a 12oz bottle of pureleaf iced tea on its side under my car, it was almost touching the subframe. I think a can of soda laid sideways will actually hit the subframe. Aka I scrape A LOT. Although I love it lol #loweredprobs
When I do my 3s swap the front will most likely get a little lower due to the extra weight over a 7afe. Idk if the rear will be effected at all, prob not tho.