Harness info Options

[Smaay]

I searched and couldn't find a thread that had detailed pictures and description of the 2 big plugs in the fuse box and where those wires go.

I know its been talked about several times in swap threads but i couldn't find anything. It might be because i cant see most hosted images from work.

So lets make a sticky that shows the connectors, and description of color of wires and where they go. This will really benefit the V6 swappers. The V6 harness' do not have several wires that the celica harness does.

[njccmd2002]

Hopefully came to right place. Questions and more after.... For gurus..

Ive been studying diagrams..... Lol



In a car with coils how does the a/c fail to see IGN signal from ignitor. And what if ACT and AC1 are missing... Not available in ecu... (2gr operates via CABbus protocol, and is going to suck)

the beams has no ignitor, wonder what signal it got.. have to get a beams diagram....

edit (after looking at prior diagrams, and pictures) beams does have the ACT, and AC1... but the beams harness has a gray wire on the IM1 pin 6, (ac amplifier plug) to the igniter plug I2 pin 4 in the 5SFE

using daniels pic... where is that wire coming from, what signal it uses.. cant find it.



Also



What happens if signal CF (aasuming cooling fan) does not exist. And what the hell does ELS. Do. Really. Increases idle if you heat windows?

2GR uses an RFC Signal but goes to the cooling fan ecus, we dont have that. would the system stop (fans) if this signal is not seen?

This post has been edited by njccmd2002: Nov 21, 2014 - 9:32 AM