6G Celicas Forums

Welcome Guest ( Log In | Register )

> rear fog light switch wiring, I don't see it stickied, just regular fog lights
post Feb 17, 2015 - 6:50 PM
+Quote Post
match220



Enthusiast
***
Joined May 13, '06
From Kaimuki, HI
Currently Offline

Reputation: 10 (100%)




I got my switch in today from The_enD and it has 8 wires. I opened it up and there is a little circuitboard inside, so I don't want to start probing with my ohm-meter. I can't find a wire diagram for the rear fogs and I don't see a section for the Euro models in bgbonline at celicatech.



--------------------
-Jay

95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other
01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished
02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
 
Start new topic
Replies
post Feb 19, 2015 - 3:04 AM
+Quote Post
malpaso



Enthusiast
*****
Joined Feb 3, '06
From Czech Republic (Europe)
Currently Offline

Reputation: 56 (100%)




Greeting to Hawaii smile.gif. Mate, the thing is EU modes has rear fog light wiring as part of whole car wiring harness. So all wires are already in the car mixed with other wires. If you want have the rear fog light and you do not have EU model (as US models don't) you simply need to take some wire and route it through the car from dash where switch is placed to the trunk. Simple circuit. Switch + bulbs + battery. No rocket science. That is why nowhere it is described in details. Only deal is to place those bulbs right (and that is described in topic Batman shared with you).


--------------------
No more replicas... This is evolution... This is SS-four :)

________[Featured Celica of 6gc.net @ 2010]_________
post Feb 19, 2015 - 3:15 AM
+Quote Post
match220



Enthusiast
***
Joined May 13, '06
From Kaimuki, HI
Currently Offline

Reputation: 10 (100%)




QUOTE (malpaso @ Feb 18, 2015 - 10:04 PM) *
Greeting to Hawaii smile.gif. Mate, the thing is EU modes has rear fog light wiring as part of whole car wiring harness. So all wires are already in the car mixed with other wires. If you want have the rear fog light and you do not have EU model (as US models don't) you simply need to take some wire and route it through the car from dash where switch is placed to the trunk. Simple circuit. Switch + bulbs + battery. No rocket science. That is why nowhere it is described in details. Only deal is to place those bulbs right (and that is described in topic Batman shared with you).


Thanks for the response! I'll be wiring it into my front fog lights since I'm finally mounting some. I won't be running rear fog lights. I've thought about it but we wouldn't have much of a need for it here (never see fog)


--------------------
-Jay

95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other
01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished
02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve
post Feb 20, 2015 - 12:56 PM
+Quote Post
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline

Reputation: 14 (100%)




QUOTE (match220 @ Feb 19, 2015 - 2:15 AM) *
QUOTE (malpaso @ Feb 18, 2015 - 10:04 PM) *
Greeting to Hawaii smile.gif. Mate, the thing is EU modes has rear fog light wiring as part of whole car wiring harness. So all wires are already in the car mixed with other wires. If you want have the rear fog light and you do not have EU model (as US models don't) you simply need to take some wire and route it through the car from dash where switch is placed to the trunk. Simple circuit. Switch + bulbs + battery. No rocket science. That is why nowhere it is described in details. Only deal is to place those bulbs right (and that is described in topic Batman shared with you).


Thanks for the response! I'll be wiring it into my front fog lights since I'm finally mounting some. I won't be running rear fog lights. I've thought about it but we wouldn't have much of a need for it here (never see fog)

>never see fog
>installing front fog lights

Just messing with you lol, I haven't even wired my front fog lights yet tongue.gif


--------------------
2007 Impreza 2.5i - Daily
1994 Camry - Sold
1994 Celica - Sold :(



Click here to see my progress thread!

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 18th, 2025 - 10:46 PM