5sfte with 2nd gen 3s injectors? Options

[Arturio55]

I have a 95 GT and over the past 2 years ive acquired quite a few Things, enough to turbo the 5sfe.
my question is, could i used 2nd gen 3sgte injectors to do this? I have the fuel rail and stock fpr also.

Other things i have are map sensors (both 2nd gen and 3rd) intercooler, piping, downpipe, boost and oil pressure gauges, about to order a manifold and i access to an safc if necessary (or could buy emanage) i recently sold the ct26 turbo i had but can always pick another one up if i can use the injectors. Dont wanna spend too much money because i plan on buying a 3rd gen 3s very soon. But if i can turbo the 5s with the stuff i already have then hey i may as well do it. If it blows up then idc, im buying a 3s anyways. If it runs good then ill just run the 5sfte til it blows or i get tired of it.

[Smaay]

easy answer, no. long answer yes but you have to add a resistor pack. 3S-GTE injectors are low impedance, 5S-FE are high. you are better off using 7M-GE green or yellow injectors.

or you can use RX-7 460 injectors.

This post has been edited by Smaay: Mar 29, 2015 - 7:00 PM

[Arturio55]

easy answer, no. long answer yes but you have to add a resistor pack. 3S-GTE injectors are low impedance, 5S-FE are high. you are better off using 7M-GE green or yellow injectors.

or you can use RX-7 460 injectors.

I have a 3rd gen 3s resistor pack. Any idea how i could wire it in?


Also would these injectors be a good buy? 440cc high impedance
http://pages.ebay.com/link/?nav=item.view&...849&alt=web

This post has been edited by Arturio55: Mar 29, 2015 - 7:56 PM