 Custom fog light wire, but using OEM multi-switch |
 Feb 26, 2017 - 3:27 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
Has anyone done this?
I was just going to use a cheap rocker switch for my fogs, but I found a multi-function switch at the junkyard the other day, so I nabbed it. Other than adding the wires/relay/fuse for the fogs, is there any way to operate the custom system off the multi-function switch? Does anyone have a pin diagram for that multi-function stalk? -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
 |
Replies
|
Feb 26, 2017 - 8:45 PM
|
|
 Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Can use the switch to trigger the relay, if you have a multi-meter should be able to find which pin on the switch corresponds with the on position. Worst case mock it up next to the battery and listen for relay clicks to find the pin you need.
-------------------- 2001 Miata LS 5-speed
|
Posts in this topic
HectortheRican Custom fog light wire, but using OEM multi-switch Feb 26, 2017 - 3:27 PM
Rowatari QUOTE (HectortheRican @ Feb 26, 2017 - 3... Feb 27, 2017 - 9:12 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 24th, 2025 - 3:55 PM |