![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jun 15, '11 From Orangeville, Ontario, Canada Currently Offline Reputation: 4 (100%) ![]() |
Hey,
I picked up a set of these coilovers. I noticed one front thrust washer has a little play in it. I have not installed them yet but wondering if it would cause issues . Would like to replace it or repair if possible. Has anyone had this issue on their setup before? I believe it could have been damaged by not being seated properly between the top mount and the plate for the spring. My setup is using the stock top mounts. Thanks, Martin |
![]() |
![]() |
|
Enthusiast ![]() Joined Jun 15, '11 From Orangeville, Ontario, Canada Currently Offline Reputation: 4 (100%) ![]() |
Thanks for the reply.
I should note that this part has roller bearings inside it. It comes apart easily . There is a circular gap around the inner part of it. If i were to put an " o" ring in there, it might just fill in the gap. Martin |
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 2:34 PM |