On to the next one evilRed95, At it again, picked up another Turbo Swapped Car Options

[sandusky1977]

Several of you already know, I've purchased a car from a follow member again. This time, I've picked up a 1995 Celica ST. Below are the specs today, and the pics of picking it up. I'll be using IG evilRed95 if anyone is interested in more frequent updates. I'll be posting here as well, just takes longer since I go through and resize and upload photos etc...

PERFORMANCE

2nd gen 3sgte swap ('91 mr2 turbo) - block: hot tanked, honed, replaced freeze plugs, decked & painted
CP pistons, Eagle Rods, ACL bearings, ARP studs, rod bolts & flywheel bolts
Rebuilt head, hot tanked, decked, new valve seals, cometic gaskets throughout, new valve cover & bolts
NGK spark plugs, Magnacore wires, new timing belt, tensioner & pulleys, new high power 160amp alternator.
new oil pump, Walbro fuel pump, water pump, & fuel filter assembly's & koyo radiator w/TRD t-stat.
poly-filled gt4 motor & tranny mounts.
LSD, just replaced trans fluid with Redline MT-90
fidanza lightened flywheel, f1 stage 2 clutch, new throwout bearing & redline fluid
3" downpipe (no cat), front mount Mishimoto intercooler, 3" straight intake to K&N air filter
JDM mr2 ECU
EGR deleted
cold start injector deleted & replaced with Intake Temp sensor in preparation for stand alone ECU
Enkei RSV bronze 17x7 w/ Hankook Ventus HRII h405 215/45/17 tires
rear disc conversion including, stainless steel brake lines, drilled & slotted rotors, new rear wheel bearings
Front Lexus ES300 2 piston Calipers, GT Rotors & Stainless Steel lines

Suspension

D2 Coilovers
Suspension Technique Sway-bars
Megan front strut bar
GT4 rear strut bar

Exterior

moonroof shade
clear side markers
completely stripped & repainted/clear coated black engine bay to match engine
hood struts
stripped and resprayed underside in rubberized black
6000k HID's in lows

Interior

6.5" component alpine type-r's (front) and6.5" alpine type-s (rear)
7th gen black perforated leather GTS seats
7th gen 3spoke steering wheel
Sabelt 2" 4pt race harnesses (not completely installed)
pure white cluster LED conversion
Vincents black-black leather accessories (arm rest, shift boot and e-brake)
"custom cup holders" relocated to inside console
clear (Tundra) courtesy door lens covers
battery relocated to trunk

And now I give you.... evilRed95










I just so happen to be a member of Team Mishi, so bonus that it has the Mishimoto FMIC



Looks like it belongs here...



I need to give it a good bath and a nice shine, it's got some nice goodies.



Time for my Premium Sound Door Cards to be installed



Finally have a use for my complete leather interior, it's been waiting for the right car.



Some cleaning, and such and this is going to be incredible.

[sandusky1977]

Fun weekend, drove down from Ann Arbor, MI to Toledo for the University of Toledo Tuners 5th Annual Charity Show, yesterday. evilRed is looking pretty good all cleaned up. Here are some photos.









In other news, my standalone MegaSquirt ECU, T3/T4 adapter, and adjustable wastegate are on the way later this week, so the build to more HP starts soon. I'm also back and forth on installing an interior, or leaving it gutted. Don't know if I want the weight or not. I've already decided that the sound system I was going to build to install in evilRed is not happening. Since I'm not going to daily this car, there is no reason to spend the money on the sound system, when there is a lot I can do for performance first.