![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Dec 20, '02 From OKC Currently Offline Reputation: 0 (0%) ![]() |
does the 5s harness have the right connector for the 2bar map sensor or is there some modification needed to be done there? thanks
DREW |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
![]() ![]() I think you can figure out the picture. Blow through the check valve to make sure the air is coming out of the other end. If not, flip it. Then put that "exhaust" side at the end of the vacuum hoses. That's where the air will come out so it doesn't reach the MAP sensor. ![]() EDIT: If you cannot see the pics, right click them and copy and paste the address to your browser...you know how Imagestation acts up. ![]() This post has been edited by OOBE: Sep 8, 2004 - 11:47 AM -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: June 9th, 2025 - 11:56 AM |