![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 27, '04 From Illinois Currently Offline Reputation: 1 (100%) ![]() |
I recently just bought NEVERSTOP's monster 3SGTE. I need to know what all needs to be done to the Wiring harness for it to work in my ST. It is my understanding that all of the wires need to be extended by 33 inches or so... But is that all that needs to be done? Also, I think that some of the plugs are different in my 7AFE ECU and may need to be changed.
Can anyone get me some type of wiring schematics and tell me what all needs to be done to get the ECU to work in my swap? Thanks alot! Yota -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) ![]() |
you have to rewire the harness to plug into your stock fuse box, or you can use dual fuse boxes like doge.
on the interrior, you have to rewire the 3rd ecu plug and 3 interrior plugs. then add in a fuel pump relay from your st185. after that, you can extend the harness or cut a new hole in your firewall directly to the ecu. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
![]() ![]() |
Lo-Fi Version | Time is now: July 28th, 2025 - 3:47 PM |