4agze Options

[st_celica_killer]

i knoe people have been posting up about doing 4agze swap into celica...but i need help...so...cause..i'm helping out a friend doing a 4agze swap into his 94 celica st....all i wanted to knoe is that.would the 4agze engine with tranny fit right in place of a celica st.stock motor mounts...or do i have to get new motor mounts.set.???? wiring a pain in the asss..as of right now still trying to convert.....thanks foe the help....

3sgte in processss..

[Mr2swift]

You will be fine with the C52 trans, however freeway cruising will result in higher rpms with the C series tranny. If you can use the E series trans then this will be your best option. I would suggest that you try all your avenues when mounting the trans. For years people thought you could not use the E series trans on the 85-86 Mr2, but recently people discovered how to get it to work. Instead of using the tranny mount BRACKET from the E series, the C series mounting bracket on the E series trans enables you to clear the suspension. It took years to figure this out. What I am saying it try all avenues first with the E series trans starting with bolting the C series trans braket to the E series transmission and try all different mounts. Thats 7 series mounts and 4 series mounts. Toyota is so interchangeable, but it is up to us that are experimenting with these swaps to try all avenues and give the proper feedback. I can promise you this, if word gets back that you can not do something in a swap then that premise will be the rule of thumb and may not be accurate if no one has exhausted all avenues.

By the way, I am running the C52 on my 4agze and I am pumping out 200+ to the wheels.

Ron (951) 283-3778
Motors Unlimited