Swap parts list, Do I have everything covered? Options

[Yota]

For my 3SGTE swap, I have the motor (NEVERSTOP's), MR2T transmission,GT Motor Mounts, FMIC, GT Koyo Radiator, and a Blitz Turbo Timer.

I know that I need:
- Axles (MR2T inner halfshafts/88-91 V6 Camry outer halfshafts)
- Boost Controller (Apexi)
- Gauges (Oil Pressure, Boost, Water Temp)
- Wiring Harness extended
- Throttle Linkage (custom)
- Shift Linkage (custom)
- Supra TT Fuel Pump
- New Clutch
- New Exhaust (3")

Am I forgetting anything? My Celica is an ST so I don't know what would need to be done that would be different from a GT other than the mounts.


Also, with the MR2T transmission, what modifications need to be made to have it work in the Celica besides the axles modifications?

[Yota]

JGreening-

Thank you for your help! I really appreciate it.

I have a guy here in town that was able to re map his wiring harness in an SR20 swap for his 240sx. He and I will work on the wiring as soon as we can.

I will check on the correct years for the camry halfshafts and confrim your response.

Thats a good idea on the HKS FCD, I'll look into it. I'd personally rather have a brand name FCD than a homemade one for reliability purposes.

I will replace one of the cats, the secondary one I will leave out. I don't have to have any emissions checks so it shouldn't be an issue. I live in the Quad Cities if you know where that is and I've never had an emissions check ran on my cars.

Where do I get an Aussie Downpipe? I plan on keeping the motor exactly how it is for a while. It's NEVERSTOPs motor, you may remember talking to him a bit about this motor at our Midwest Meet up in Starved Rock this past October.

What does the Blitz EBC have over the Apexi EBC? I will look into it because it seems cheaper as well.


Lagos-
Thank you for the tip. What I plan on doing this month, is having all new gaskets replaced in the motor. Everything so far has checked out to be fine. I am not doing the swap, my mechanic is and he's reputable for odd-balls swaps including a TT swap into an N/A 300ZX.

I'm only using the toys to help keep the motor stable, as it is a daily driver for the next year or so.

I already have my front mount intercooler. It will be my first mod.


Can anyone verify Rjb23's response about the GT4 motor mounts on an MR2T transmission?

Thanks for your help, all