crazy 7afte plans, i'm retarded Options

[playr158]

ok so got a junk yard here ANY MOTOR 150$

here is wat i have planned once the front is done
buy a used motor completely strip it
contact arais and such
for

83mm forged pistons for 9:1 ish compression
forged rods as well
port and polish
2.5" full exhaust
T3 turbo
30" x 5" x 2" intercooler
BOV -not sure yet
megasquirt ems
225lph walbro fuel pump
custom fuel rail
regrind camshaft
lightened flywheel

and a few other things i can't think of right now
put in your input

[nik]

83mm forged pistons for 9:1 ish compression $300 labor $500-700
forged rods as well $700
port and polish $800
2.5" full exhaust $250 crush
T3 turbo $300
30" x 5" x 2" intercooler $250
BOV -not sure yet $50-200
megasquirt ems $???? depends on what ya get
225lph walbro fuel pump $100
custom fuel rail $300+
regrind camshaft $200 (guess)
lightened flywheel $50-100


hidden cost $1000+

TOTAL COST $ 5200

If were to do this project which i am just 7agte you need to figure out if your willing enough to go all the way. Or just buy a 3sgte and swap that in because cost is going to close but good luck