 axles..., need info |
 Mar 24, 2005 - 8:04 PM
|
 
|
 Enthusiast  Joined Jun 4, '04 From Northern New Jersey Currently Offline Reputation: 2 (100%)  |
hey guys... someone please enlighten me!!! say i was gunna do the camry v6/solara tranny swap... i know i need the all-trac axles and the mr2t axles correct? my question is which all-trac axle CAN i use? st165, st185, or st205 axles??? or are they all the same???
 im a very confused individual! BBoY --------------------  ..(formerly daily driven) 3S-GTE powered celica currently set @ 12psi.. |
 |
Replies
|
Mar 30, 2005 - 2:11 AM
|
|
 Enthusiast Joined Apr 10, '03 From South Central Los Angeles Currently Offline Reputation: 0 (0%) |
i believe the axels that you're using ( st185 outer shafts) are a wee bit too short. That's why they keep going out on you. I've been using the camry outer shaft with for a while now, and have'nt had a problem. I've ran the car hard, and the axels don't pop out or break.
Super, As for the mounts, I know the ST205 mounts work cause the are the ones I'm using and there was no modification needed. I know that you can use the GT front and rear mount and brackets. As for the driver side mounts, i know you can't use the GT mounts because the bracket is different and will not line up properly. The MR2 mounts will line up perfectly on the tranny, but not sure how it will mount up to the bracket welded on the chassis of the celica. That's why i didn't take a change and just bought the ST205 mounts. I just didn't feel like welding a mount. I know you asked for me to post some info on mounting this tranny, but everything is pretty much straight forward. Now, if you have certain questions, by all means, just ask and i'll give you my input. hope that helps. |
|
Apr 6, 2005 - 7:15 PM
|
|
|
Enthusiast Joined Mar 21, '04 From Oceanside Currently Offline Reputation: 2 (100%) |
What year axles from the Camry V6? I found new ones cost about $400 from a 93. I can get one from pick your part for $85 and a rebuilt for $110. I just want to make sure of the year for the fit. I have the 94 MR2 tranny and inner shaft.
QUOTE(sphinx @ Mar 30, 2005 - 7:11 AM) i believe the axels that you're using ( st185 outer shafts) are a wee bit too short. That's why they keep going out on you. I've been using the camry outer shaft with for a while now, and have'nt had a problem. I've ran the car hard, and the axels don't pop out or break. Super, As for the mounts, I know the ST205 mounts work cause the are the ones I'm using and there was no modification needed. I know that you can use the GT front and rear mount and brackets. As for the driver side mounts, i know you can't use the GT mounts because the bracket is different and will not line up properly. The MR2 mounts will line up perfectly on the tranny, but not sure how it will mount up to the bracket welded on the chassis of the celica. That's why i didn't take a change and just bought the ST205 mounts. I just didn't feel like welding a mount. I know you asked for me to post some info on mounting this tranny, but everything is pretty much straight forward. Now, if you have certain questions, by all means, just ask and i'll give you my input. hope that helps. [right][snapback]263919[/snapback][/right] |
Posts in this topic
BBoYRuGGeD axles... Mar 24, 2005 - 8:04 PM
ZoomZoom I know the st185 will work, but can somebody tell ... Mar 25, 2005 - 10:07 AM ZoomZoom can somebody please answer this question !... Mar 28, 2005 - 8:41 AM Supersprynt You need hybrid axles no matter what. You can use ... Mar 28, 2005 - 10:32 AM
Green_MachToy QUOTE(Supersprynt @ Mar 28, 2005 - 3:32 PM)Yo... Mar 29, 2005 - 11:40 AM ZoomZoom so the st205 outer shafts would work for the hybri... Mar 28, 2005 - 11:41 AM sphinx I'm using Camry outer shafts and MR2 inner sha... Mar 28, 2005 - 12:38 PM Supersprynt Sphinx whst kinda information and or knowledge do ... Mar 28, 2005 - 2:47 PM BBoYRuGGeD QUOTE(Supersprynt @ Mar 28, 2005 - 7:47 PM)Sp... Mar 28, 2005 - 6:46 PM Supersprynt Well mounts are mounts and I have MR2 mounts and G... Mar 28, 2005 - 11:42 PM Supersprynt Yeah thats what DMC said you were doing, where are... Mar 29, 2005 - 12:21 PM Green_MachToy The first set I actualy seized the Joint up betwee... Mar 29, 2005 - 1:21 PM Supersprynt Yeah unfortunately I dont have those. I was thinki... Mar 29, 2005 - 2:13 PM Supersprynt Where'd you find your ST205 mounts? I have a c... Mar 30, 2005 - 7:43 AM sphinx I had to order my mounts through the dealer. But y... Mar 30, 2005 - 11:06 AM Supersprynt Excellent so it looks like what I'm going to e... Mar 30, 2005 - 11:22 AM sphinx Ok. Here are the part #'s for the motor mounts... Apr 1, 2005 - 12:02 AM Clipsetuner I am using the Solara Tranny with my 3s swap with ... Mar 30, 2005 - 12:55 PM ZoomZoom I thought your supposed to used the inner shaft of... Mar 31, 2005 - 9:17 AM celica3sgte This is an excellent write up. However, I thought... Jun 7, 2005 - 11:45 AM Rjb23 Has everyone seen this yet?
http://www.geocities.... Jun 7, 2005 - 12:35 PM jgreening QUOTE(Rjb23 @ Jun 7, 2005 - 12:35 PM)Has ever... Jun 7, 2005 - 12:55 PM lagos have any of you guys ever found a good place to bu... Jun 7, 2005 - 1:09 PM BBoYRuGGeD QUOTE(lagos @ Jun 7, 2005 - 6:09 PM)have any ... Jun 7, 2005 - 4:48 PM celica3sgte I know, I got a kit from there that was universal ... Jun 7, 2005 - 3:52 PM sphinx sorry for the late response.
My axels consist of... Jun 7, 2005 - 6:00 PM jgreening QUOTE(sphinx @ Jun 7, 2005 - 6:00 PM)sorry fo... Jun 7, 2005 - 6:01 PM sphinx QUOTE(jgreening @ Jun 7, 2005 - 3:01 PM)QUOTE... Jun 7, 2005 - 6:15 PM jgreening QUOTE(sphinx @ Jun 7, 2005 - 6:15 PM)QUOTE(jg... Jun 7, 2005 - 11:09 PM celica3sgte This is great info, more descriptive than we had b... Jun 8, 2005 - 4:32 PM jgreening QUOTE(celica3sgte @ Jun 8, 2005 - 4:32 PM)Thi... Jun 8, 2005 - 5:02 PM lagos be carefull with axels from advance auto, they use... Jun 8, 2005 - 4:41 PM lagos i 2nd synchro mesh !
only problem is, im hav... Jun 8, 2005 - 6:14 PM celica3sgte I found out today that the 91-92 st185 axles are i... Jun 9, 2005 - 3:48 AM sphinx I'm using Redline MT-90 on my transmission. Ex... Jun 9, 2005 - 1:34 PM Rjb23 If you use the e153 tranny do you still need the a... Jun 9, 2005 - 2:32 PM celica3sgte Here's what I used that worked.
92 mr2 lsd tra... Jun 13, 2005 - 3:05 PM Rjb23 have you tried the st185 back mount? Jun 13, 2005 - 3:10 PM celica3sgte QUOTE(Rjb23 @ Jun 13, 2005 - 1:10 PM)have you... Jun 13, 2005 - 9:58 PM Rjb23 I think you can use the st185 cross member, when I... Jun 13, 2005 - 11:07 PM Consynx we're getting many different combos, this is a... Jun 14, 2005 - 12:28 AM hesed77 QUOTE (Consynx @ Jun 14, 2005 - 1:28... Sep 30, 2010 - 10:29 AM defgeph you have to specify which generations of gt4's... Jun 14, 2005 - 1:30 AM defgeph GT And ST205 side by side. GT is the top one Jun 14, 2005 - 1:43 AM Consynx i remember this pic, which is why i am...waiting f... Jun 14, 2005 - 11:47 AM celica3sgte Those cables in the top pic(which are GT cables) w... Jun 14, 2005 - 6:07 PM sphinx QUOTE(Consynx @ Jun 13, 2005 - 9:28 PM)we... Jun 15, 2005 - 6:43 PM jgreening QUOTE(sphinx @ Jun 15, 2005 - 6:43 PM)Also, i... Jun 15, 2005 - 10:44 PM Rjb23 I would seriously suggest that someone call up xat... Jun 15, 2005 - 8:38 PM celica3sgte I'll ask XAT when I get back into tampa next t... Jun 15, 2005 - 11:09 PM ems3s I just tried using the st185 crossmember and it in... Jun 18, 2005 - 11:18 PM sphinx QUOTE(ems3s @ Jun 18, 2005 - 8:18 PM)
I belie... Jun 20, 2005 - 10:38 AM Consynx so 204 are same as 205, but our 202 is different? ... Jun 20, 2005 - 11:14 AM ems3s Not sure if you really mean st202 because that was... Jun 21, 2005 - 7:37 AM Supersprynt Wow I havent seen this much GOOD information in a ... Jun 21, 2005 - 10:39 AM Consynx he got his from a guy on here a while back parting... Jun 21, 2005 - 10:53 AM Supersprynt Yeah I seen them go for $500 some places, tha... Jun 21, 2005 - 10:56 AM celica3sgte Supersprint you can say that again, this is good i... Jun 29, 2005 - 5:08 AM lagos if somone types up a nice post that has all the in... Jun 29, 2005 - 12:32 PM Consynx mr2 tranny into celi = PITA Jun 29, 2005 - 1:33 PM Supersprynt Time for a bump.
This is a pic of the E153 rear... Jul 13, 2005 - 9:19 PM celicaracer18 I'm so glad XAt is doinf this for me. i don... Jul 13, 2005 - 9:55 PM Supersprynt Has anybody tried using a GT front mount & LH ... Jul 14, 2005 - 6:55 PM Supersprynt QUOTE(celica3sgte @ Jun 13, 2005 - 4:05 PM)94... Jul 14, 2005 - 7:13 PM 6G94celica ok ok ok god this is hard to comprehend all this b... Dec 16, 2006 - 12:16 AM BBoYRuGGeD QUOTE(6G94celica @ Dec 16, 2006 - 5... Dec 16, 2006 - 10:00 AM celica3sgte Bboy is correct. The st205 front insulator and mo... Dec 17, 2006 - 6:32 PM 6G94celica ok so are all the mounts that are able to be used ... Dec 19, 2006 - 10:11 PM stephen_lee FML Sep 30, 2010 - 7:28 PM zeus83 i bought a tranny...the sellers claims its from a ... Mar 5, 2011 - 7:33 AM zeus83 update....
after getting the MCV21 V6 Camry outer... Mar 9, 2011 - 6:44 AM stephen_lee a lot of guys need spacers. pretty sure those 2 a... Mar 9, 2011 - 7:29 PM zeus83 then why do a majority still recommend the ST185 O... Mar 10, 2011 - 11:07 AM stephen_lee apparenty they are different, just checked w/ toyo... Mar 10, 2011 - 12:55 PM zeus83 problem finally SOLVED! went to the junkyard a... Mar 12, 2011 - 1:01 PM stephen_lee no its an electronic one. it came from a lexus, so... Mar 12, 2011 - 1:38 PM zeus83 mine came with the mech type...cld be JDM version.... Mar 13, 2011 - 8:10 AM zfjohnson07 has anyone changed a cv axel and bought one at ore... Mar 19, 2011 - 7:11 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 17th, 2025 - 7:44 PM |