![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined May 24, '03 From Andrews TX Currently Offline Reputation: 1 (100%) ![]() |
I don't know if anyone has asked this yet...
But can I use a 2-bar 3SGTE map sensor on my 7AFTE, I have heard of HONDA guys that I know of using 1.2-2.0bar map sensors off of other vehicles on thier swapped cars so they don't keep damaging MAP sensors and get better readings, so can we do this as well?? I have heard that my SAFC-IIv2 can transfer these signal to be able to work with vehicles, and I don't mind changing clips if that has to be done, or radd seperate power & ground wires for the sensor??? -------------------- If anyone is missing NASCAR and it's not on Speed Channel, take a fistful of Skittles, throw them in the toilet and hit the flush handle. Instant NASCAR!!!
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) ![]() |
QUOTE(dans_st @ Sep 21, 2005 - 4:35 AM) I don't know if anyone has asked this yet... But can I use a 2-bar 3SGTE map sensor on my 7AFTE, I have heard of HONDA guys that I know of using 1.2-2.0bar map sensors off of other vehicles on thier swapped cars so they don't keep damaging MAP sensors and get better readings, so can we do this as well?? I have heard that my SAFC-IIv2 can transfer these signal to be able to work with vehicles, and I don't mind changing clips if that has to be done, or radd seperate power & ground wires for the sensor??? [right][snapback]336795[/snapback][/right] If you're running an SAFC then yeah, you can do that and modify the signal as you need to. I assume you're running larger injectors as well. -Doc -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
![]() ![]() |
Lo-Fi Version | Time is now: September 22nd, 2025 - 8:51 AM |