need help!!! Options

[pnoywitmustrdsau...]

im about the change the driver side axle becauase it is pretty bad, and all i was wondering was what are the steps in changing it and any recommendation in oil transmission fluid? thanks in advances

[Bigmeanbulldog55]

You need to remove wheel, remove bolts holding the hub on, remove center bolt on axle to hub (In the middle of the rotor), I think you just pull it out now. The passanger side has another thing holding it midway I think, I could be thinking of my other car. When you reasemble, make sure that nut in the middle of the rotor is very tite. Toyota recomends you use this special stuff they sell for tranny fuild. It's a little better in my opinion, but you can use synro-mesh. Synro-mesh is a good bit cheaper and you can pick it up from your local parts store. Good luck.

EDIT: For future referance, naming your topic something that at least hints to what your wanting help with gets more attention. It also helps others find the info when searching. "need help," is pretty vage.

This post has been edited by Bigmeanbulldog55: Jan 22, 2006 - 12:24 PM