4wd conversion Options

[TRD_Girl]

I would like to know where i can find the rear end and drive shaft,etc.. to convert my 95 gt (3s-gte) fwd to 4wd.I search around my place and ebay nothing.thanks!

[Guest_Matthew_*]

ok this is not something new


you have to get a front AND rear clip of a gt4...it 100% has to be an ST205. thats a 6th gen celica gt4. you have to take out the floor of your USDM celica and swap in the floor from the ST205. also you have to swap in trunk pans and gas tank as well....be prepared to pay around 2-4 grand for the labor


the only people besides my uncle and me to do this would be Eric at E.L. Prototypes in Aruza California. they are real good. although never done anything like this before.


if anyone tells you that you can just cut a spot and weld the rear differential in there. but thats not safe. and it'll be a bitch to get everything lined up correctly...


the front and rear clip that I purchased from www.jarcoinc.com was 4500 not shipped.


dont go to toysport they are to expensive.

do some more research save some money and call E. L. prototypes