gauge lighting..., advice needed Options

[malpaso]

I would like tu upgrade gauges with some glow gauges like this one:



I have a few questions about this:

- Do you have anybody already instaled something like this?
(Of course you have, I saw it somewhere here, but I cant find It again ). Picture or link please!!!
- Where to buy it? Please some tips and links too...
- Is there any problem with instalation? I wondering how to remove all needels before swap...

Thanks a lot

This post has been edited by malpaso: Mar 14, 2006 - 6:43 AM

[ThAixGuYx2k7]

or..instead of messing with the needles, use double sided scotch tape. NOT the double sided 3M tape. You can get it from office max for like 2 or 3 bucks. Make sure when you install it that your careful with the needles. DONT move the gas needle...but u can move the others but dont pull them up. Mine looked like this when they still worked, but sadly, i messed up the wiring

[malpaso]

or..instead of messing with the needles, use double sided scotch tape. NOT the double sided 3M tape. You can get it from office max for like 2 or 3 bucks. Make sure when you install it that your careful with the needles. DONT move the gas needle...but u can move the others but dont pull them up. Mine looked like this when they still worked, but sadly, i messed up the wiring
...

Looks good, what about red needles? White looks good at daylight, but in the night red would be better (I think). Hmmm...