Trying to finish up my swap, ?????? Options

[lantz2121]

I need to know where this stuff goes? I have a st205 engine but some of the stuff has to be similar to the 2nd generation.
This plug is by the TB inlet; can't remember if it went to the air/water intercooler?


<br>
This is another pic of the same plug by the TB.

<br>
Need to know where these two vaccum hoses go?

<br>
Two mysterious brown plugs by the back of the intake runners?

<br>

Don't know where this vac line goes?

<br>

same line different picture.

<br>
pointing to a nipple coming out of the back of the lower left side of the head if you were laying on your back under the car.

<br>
Better pic of the nipple

<br>
Looks like a pressure vent where does it go?
Also have a plug labled fuel pump? what is this?


Thanks alot guys for any or all help.

This post has been edited by lantz2121: Mar 16, 2006 - 8:00 PM

[Insanity-74]

The first one looks like the connection to a sensor under the throttle body. There are two under the throttle body but have different connections so you shouldnt get mixed up.

The two vacuum lines (second picture) the thicker one is the air feed to the idle up valve, it goes to the standard airbox....the thinner line is the dump valve vacuum line.

The third picture has been covered.

The pressure vent thing is the rocker cover vent pipe...should feed into your turbo intake pipe.

Pictures from further away would be better so I can get my bearings as to where your looking