Trying to finish up my swap, ?????? Options

[lantz2121]

I need to know where this stuff goes? I have a st205 engine but some of the stuff has to be similar to the 2nd generation.
This plug is by the TB inlet; can't remember if it went to the air/water intercooler?


<br>
This is another pic of the same plug by the TB.

<br>
Need to know where these two vaccum hoses go?

<br>
Two mysterious brown plugs by the back of the intake runners?

<br>

Don't know where this vac line goes?

<br>

same line different picture.

<br>
pointing to a nipple coming out of the back of the lower left side of the head if you were laying on your back under the car.

<br>
Better pic of the nipple

<br>
Looks like a pressure vent where does it go?
Also have a plug labled fuel pump? what is this?


Thanks alot guys for any or all help.

This post has been edited by lantz2121: Mar 16, 2006 - 8:00 PM

[Insanity-74]

Right....just had a quick look for ya......around the throttle body there are 4 connections that I can see....one goes to the throttle position sensor on the right hand side of the TB...another is a temp sensor under the throttle body. One connects to a temp sensor in the inlet manifold right next to, and slightly down from the RH side of the TB...another on the left goes to the inlet manifold pressure sensor on the bulkhead, so its quite a long lead....thats all I can see. All the others from that part of the loom go to injectors.