 DYNO run tomorow :D, for my Beams |
 Dec 4, 2006 - 2:35 PM
|
 
|
 Enthusiast  Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%)  |
Well Finally - im out to the Dyno tomorow - to get the baseline dyno, and to see what i will gain up with some things that i have planed for my Beamsy.
I dont know what to expect from a compleatly stock engine (exept CAT is removed and TRD drop it is in the stock box). I would be more then gald if it would pull the stock 197hp numbers. Driving it fells like it has more then enouth of Tq and Hp. Comparing this celi to my Old ST-T - there is not so much different - exept less wheel spin on the SSIII cuz of the LSD that i have in there  And ofcorse the difference in Tq that my Turbo 7A had.One thing that bother me time after time is abit too loud sound of the Valves i guess. is it normal on the 3Sge? Cuz the engine when it is cold - the clicking sound is kinda strange to me, when it warms up - it quets down - but still my 7A wasnt giving such sound at all... My beams has 86K km on it and by the look to the car it doesnt seems like it was driven hard before - cuz the driver of this car in Japan was some mid age women, so the only thing that was dead when i got the car was Clutch O well - tomorow i will see what this beast can do. Will post chart for sure. -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
 |
Replies
|
Dec 5, 2006 - 9:15 AM
|
|
|
Enthusiast Joined Mar 3, '04 From Hollywood, MD Currently Offline Reputation: 6 (100%) |
thats like a 176 hp right?
|
|
Dec 5, 2006 - 9:19 AM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
QUOTE(brianforster @ Dec 5, 2006 - 7:15 AM) [snapback]507924[/snapback] thats like a 176 hp right? Yup - only its 178hp as for the Nm converte to Lbs of Tq - some one find the damn converter and convert it
-------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
Posts in this topic
doGGy DYNO run tomorow :D Dec 4, 2006 - 2:35 PM
lagos dont worry about any type of valve tick. its all t... Dec 4, 2006 - 2:40 PM
doGGy QUOTE(lagos @ Dec 4, 2006 - 12:40 PM... Dec 4, 2006 - 2:49 PM Coomer My valves tick as well, and have for years...I don... Dec 4, 2006 - 2:45 PM Bigmeanbulldog55 Good luck, man. I forgot you bought a Beams. 200... Dec 4, 2006 - 3:04 PM doGGy well came home like 5 mins before Im not surprise... Dec 5, 2006 - 9:14 AM celicaST QUOTE(doGGy @ Dec 5, 2006 - 7:14 AM)... Dec 5, 2006 - 9:29 AM doGGy QUOTE(celicaST @ Dec 5, 2006 - 7:29 ... Dec 5, 2006 - 9:38 AM 95CelicaST QUOTEdamn i guess i made this guess way to easy
... Dec 5, 2006 - 10:07 AM Kadett To convert lb/ft to nm multiply by 1.35
To convert... Dec 5, 2006 - 10:12 AM playr158 itbs, some cams?, better fuel
but those lines lo... Dec 5, 2006 - 10:21 AM netrata An ITB setup would be a sick setup for the BEAMS 3... Dec 5, 2006 - 4:06 PM Kadett Its no beams because you can clearly see the spark... Dec 5, 2006 - 4:12 PM lagos so its about 178hp and 144 tq at the wheels? not ... Dec 5, 2006 - 4:22 PM Bigmeanbulldog55 Doesn't the 3sge come with ITB in the manifold... Dec 5, 2006 - 4:32 PM Kadett Those are butterfly valve's used in the T-Vis ... Dec 5, 2006 - 4:42 PM BLADDER_MASTER . Dec 6, 2006 - 12:48 AM lagos QUOTE(Bigmeanbulldog55 @ Dec 5, 2006 - 4... Dec 5, 2006 - 5:18 PM Kwanza26 There is a slight problem if you plan to run ITBs.... Dec 5, 2006 - 5:28 PM doGGy QUOTE(Kwanza26 @ Dec 5, 2006 - 3:28 ... Dec 6, 2006 - 4:02 AM netrata Kwanza was right! There is a AFM on the BEAMS... Dec 5, 2006 - 7:27 PM Kwanza26 QUOTE(netrata @ Dec 6, 2006 - 12:27 ... Dec 5, 2006 - 10:12 PM UKcelicaKev Put your higher octance fuel in, it makes so much ... Dec 19, 2006 - 7:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 11:54 AM |