6G Celicas Forums

Welcome Guest ( Log In | Register )

> DYNO run tomorow :D, for my Beams
post Dec 4, 2006 - 2:35 PM
+Quote Post
doGGy



Enthusiast
*****
Joined Oct 28, '02
From Europe, Lithuania
Currently Offline

Reputation: 8 (100%)




Well Finally - im out to the Dyno tomorow - to get the baseline dyno, and to see what i will gain up with some things that i have planed for my Beamsy.

I dont know what to expect from a compleatly stock engine (exept CAT is removed and TRD drop it is in the stock box). I would be more then gald if it would pull the stock 197hp numbers.

Driving it fells like it has more then enouth of Tq and Hp. Comparing this celi to my Old ST-T - there is not so much different - exept less wheel spin on the SSIII cuz of the LSD that i have in there biggrin.gif And ofcorse the difference in Tq that my Turbo 7A had.

One thing that bother me time after time is abit too loud sound of the Valves i guess. is it normal on the 3Sge? Cuz the engine when it is cold - the clicking sound is kinda strange to me, when it warms up - it quets down - but still my 7A wasnt giving such sound at all... My beams has 86K km on it and by the look to the car it doesnt seems like it was driven hard before - cuz the driver of this car in Japan was some mid age women, so the only thing that was dead when i got the car was Clutch

O well - tomorow i will see what this beast can do. Will post chart for sure.


--------------------
Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds
<<<<<< DCw / JDMart >>>>>>>
 
Start new topic
Replies
post Dec 5, 2006 - 9:14 AM
+Quote Post
doGGy



Enthusiast
*****
Joined Oct 28, '02
From Europe, Lithuania
Currently Offline

Reputation: 8 (100%)




well came home like 5 mins before biggrin.gif Im not surprised - and was hoping to get these numbers. And rules then going to the dyno (note to myself biggrin.gif):

1. Never go to Dyno with witer tires - they will give you big loss of power and big loss of the transmission.
2. next time instead of using 95 octane fuel - put the DAMN 98 on with Jap engines suposto run...

Here are the Curve and numbers, they are not impressive at all - but its a stock engine - and i was just making the base line to work with so yea smile.gif i could manage to get about 5hp if i where on the normal tires - and i think bout 3-4hp if i where on 98 fuel instead of 95.

And i was running damn rich all the way - why is it so - no one knows yet... Numbers on wideband at the 7400rpm where close to 10.2 so yea kindasad.gif

IPB Image
IPB Image

well - now im going to get back to my garage - and start the things rolling on the Engine biggrin.gif For now - i can tell only few things of what is upcoming - MSQ + somthing that gives a pure perfect sound of breathing N/A engine biggrin.gif what is it - you can only guess...



--------------------
Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds
<<<<<< DCw / JDMart >>>>>>>
post Dec 5, 2006 - 9:29 AM
+Quote Post
celicaST



Enthusiast
*****
Joined Jun 23, '05
Currently Offline

Reputation: 4 (100%)




QUOTE(doGGy @ Dec 5, 2006 - 7:14 AM) [snapback]507923[/snapback]

somthing that gives a pure perfect sound of breathing N/A engine biggrin.gif what is it - you can only guess...


im guessing itb's, thats going to be awesome smile.gif


--------------------
IPB Image

I think Bigfoot is blurry, that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra scary to me, because there's a large, out-of-focus monster roaming the countryside.

Posts in this topic
- doGGy   DYNO run tomorow :D   Dec 4, 2006 - 2:35 PM
- - lagos   dont worry about any type of valve tick. its all t...   Dec 4, 2006 - 2:40 PM
|- - doGGy   QUOTE(lagos @ Dec 4, 2006 - 12:40 PM...   Dec 4, 2006 - 2:49 PM
- - Coomer   My valves tick as well, and have for years...I don...   Dec 4, 2006 - 2:45 PM
- - Bigmeanbulldog55   Good luck, man. I forgot you bought a Beams. 200...   Dec 4, 2006 - 3:04 PM
- - doGGy   well came home like 5 mins before Im not surprise...   Dec 5, 2006 - 9:14 AM
|- - celicaST   QUOTE(doGGy @ Dec 5, 2006 - 7:14 AM)...   Dec 5, 2006 - 9:29 AM
|- - doGGy   QUOTE(celicaST @ Dec 5, 2006 - 7:29 ...   Dec 5, 2006 - 9:38 AM
- - brianforster   thats like a 176 hp right?   Dec 5, 2006 - 9:15 AM
|- - doGGy   QUOTE(brianforster @ Dec 5, 2006 - 7...   Dec 5, 2006 - 9:19 AM
- - 95CelicaST   QUOTEdamn i guess i made this guess way to easy ...   Dec 5, 2006 - 10:07 AM
- - Kadett   To convert lb/ft to nm multiply by 1.35 To convert...   Dec 5, 2006 - 10:12 AM
- - playr158   itbs, some cams?, better fuel but those lines lo...   Dec 5, 2006 - 10:21 AM
- - netrata   An ITB setup would be a sick setup for the BEAMS 3...   Dec 5, 2006 - 4:06 PM
- - Kadett   Its no beams because you can clearly see the spark...   Dec 5, 2006 - 4:12 PM
- - lagos   so its about 178hp and 144 tq at the wheels? not ...   Dec 5, 2006 - 4:22 PM
- - Bigmeanbulldog55   Doesn't the 3sge come with ITB in the manifold...   Dec 5, 2006 - 4:32 PM
- - Kadett   Those are butterfly valve's used in the T-Vis ...   Dec 5, 2006 - 4:42 PM
|- - BLADDER_MASTER   .   Dec 6, 2006 - 12:48 AM
- - lagos   QUOTE(Bigmeanbulldog55 @ Dec 5, 2006 - 4...   Dec 5, 2006 - 5:18 PM
- - Kwanza26   There is a slight problem if you plan to run ITBs....   Dec 5, 2006 - 5:28 PM
|- - doGGy   QUOTE(Kwanza26 @ Dec 5, 2006 - 3:28 ...   Dec 6, 2006 - 4:02 AM
- - netrata   Kwanza was right! There is a AFM on the BEAMS...   Dec 5, 2006 - 7:27 PM
|- - Kwanza26   QUOTE(netrata @ Dec 6, 2006 - 12:27 ...   Dec 5, 2006 - 10:12 PM
- - UKcelicaKev   Put your higher octance fuel in, it makes so much ...   Dec 19, 2006 - 7:54 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: June 18th, 2025 - 3:32 PM