 DYNO run tomorow :D, for my Beams |
 Dec 4, 2006 - 2:35 PM
|
 
|
 Enthusiast  Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%)  |
Well Finally - im out to the Dyno tomorow - to get the baseline dyno, and to see what i will gain up with some things that i have planed for my Beamsy.
I dont know what to expect from a compleatly stock engine (exept CAT is removed and TRD drop it is in the stock box). I would be more then gald if it would pull the stock 197hp numbers. Driving it fells like it has more then enouth of Tq and Hp. Comparing this celi to my Old ST-T - there is not so much different - exept less wheel spin on the SSIII cuz of the LSD that i have in there  And ofcorse the difference in Tq that my Turbo 7A had.One thing that bother me time after time is abit too loud sound of the Valves i guess. is it normal on the 3Sge? Cuz the engine when it is cold - the clicking sound is kinda strange to me, when it warms up - it quets down - but still my 7A wasnt giving such sound at all... My beams has 86K km on it and by the look to the car it doesnt seems like it was driven hard before - cuz the driver of this car in Japan was some mid age women, so the only thing that was dead when i got the car was Clutch O well - tomorow i will see what this beast can do. Will post chart for sure. -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
 |
Replies
|
Dec 5, 2006 - 9:14 AM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
well came home like 5 mins before
Im not surprised - and was hoping to get these numbers. And rules then going to the dyno (note to myself ):1. Never go to Dyno with witer tires - they will give you big loss of power and big loss of the transmission. 2. next time instead of using 95 octane fuel - put the DAMN 98 on with Jap engines suposto run... Here are the Curve and numbers, they are not impressive at all - but its a stock engine - and i was just making the base line to work with so yea  i could manage to get about 5hp if i where on the normal tires - and i think bout 3-4hp if i where on 98 fuel instead of 95.And i was running damn rich all the way - why is it so - no one knows yet... Numbers on wideband at the 7400rpm where close to 10.2 so yea    well - now im going to get back to my garage - and start the things rolling on the Engine For now - i can tell only few things of what is upcoming - MSQ + somthing that gives a pure perfect sound of breathing N/A engine what is it - you can only guess...-------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
|
Dec 5, 2006 - 9:29 AM
|
|
 Enthusiast Joined Jun 23, '05 Currently Offline Reputation: 4 (100%) |
QUOTE(doGGy @ Dec 5, 2006 - 7:14 AM) [snapback]507923[/snapback] somthing that gives a pure perfect sound of breathing N/A engine what is it - you can only guess...im guessing itb's, thats going to be awesome
--------------------  I think Bigfoot is blurry, that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra scary to me, because there's a large, out-of-focus monster roaming the countryside. |
|
Dec 5, 2006 - 9:38 AM
|
|
|
Enthusiast Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%) |
QUOTE(celicaST @ Dec 5, 2006 - 7:29 AM) [snapback]507928[/snapback] QUOTE(doGGy @ Dec 5, 2006 - 7:14 AM) [snapback]507923[/snapback] somthing that gives a pure perfect sound of breathing N/A engine what is it - you can only guess...im guessing itb's, thats going to be awesome damn i guess i made this guess way to easy  -------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
Posts in this topic
doGGy DYNO run tomorow :D Dec 4, 2006 - 2:35 PM
lagos dont worry about any type of valve tick. its all t... Dec 4, 2006 - 2:40 PM
doGGy QUOTE(lagos @ Dec 4, 2006 - 12:40 PM... Dec 4, 2006 - 2:49 PM Coomer My valves tick as well, and have for years...I don... Dec 4, 2006 - 2:45 PM Bigmeanbulldog55 Good luck, man. I forgot you bought a Beams. 200... Dec 4, 2006 - 3:04 PM brianforster thats like a 176 hp right? Dec 5, 2006 - 9:15 AM doGGy QUOTE(brianforster @ Dec 5, 2006 - 7... Dec 5, 2006 - 9:19 AM 95CelicaST QUOTEdamn i guess i made this guess way to easy
... Dec 5, 2006 - 10:07 AM Kadett To convert lb/ft to nm multiply by 1.35
To convert... Dec 5, 2006 - 10:12 AM playr158 itbs, some cams?, better fuel
but those lines lo... Dec 5, 2006 - 10:21 AM netrata An ITB setup would be a sick setup for the BEAMS 3... Dec 5, 2006 - 4:06 PM Kadett Its no beams because you can clearly see the spark... Dec 5, 2006 - 4:12 PM lagos so its about 178hp and 144 tq at the wheels? not ... Dec 5, 2006 - 4:22 PM Bigmeanbulldog55 Doesn't the 3sge come with ITB in the manifold... Dec 5, 2006 - 4:32 PM Kadett Those are butterfly valve's used in the T-Vis ... Dec 5, 2006 - 4:42 PM BLADDER_MASTER . Dec 6, 2006 - 12:48 AM lagos QUOTE(Bigmeanbulldog55 @ Dec 5, 2006 - 4... Dec 5, 2006 - 5:18 PM Kwanza26 There is a slight problem if you plan to run ITBs.... Dec 5, 2006 - 5:28 PM doGGy QUOTE(Kwanza26 @ Dec 5, 2006 - 3:28 ... Dec 6, 2006 - 4:02 AM netrata Kwanza was right! There is a AFM on the BEAMS... Dec 5, 2006 - 7:27 PM Kwanza26 QUOTE(netrata @ Dec 6, 2006 - 12:27 ... Dec 5, 2006 - 10:12 PM UKcelicaKev Put your higher octance fuel in, it makes so much ... Dec 19, 2006 - 7:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 12:13 PM |