Dec 7, 2006 - 7:19 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Mar 29, '06 From Hull, UK Currently Offline Reputation: 0 (0%) |
Ok, every day when I've been sitting at lights or in traffic with my foot on the clutch pedal, I go to let off the pedal and it bites immediately (no play at all) and the pedal only moves upwards about an inch. If I put my foot under the pedal and lift slightly then it springs back the remaining 3 inches it normally travels. When driving and changing normally it doesn't stick, and the biting point is about an inch from fully depressed, its only after having it depressed for a short while, whilst in gear.
If I don't have it in gear and depress it for a while then release it never sticks down. Any ideas? Is there any joints that I could lubricate that may free it off (inside the car or in the engine bay) |
![]() |
Dec 7, 2006 - 3:56 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
yes theres a spring for your clutch pedal. if you really think thats what it is then get under there and check it. then at least if thats not the problem you can move on to bleeding and checking seals
-------------------- |
vsideboy Sticking Clutch Pedal Dec 7, 2006 - 7:19 AM
GMoney Check ur clutch master cylinder, that happen to me... Dec 7, 2006 - 8:31 AM
vsideboy I was hoping it wasn't that, but I cannot unde... Dec 7, 2006 - 8:36 AM
GMoney Your Clutch uses a spring right ? Dec 7, 2006 - 8:38 AM
Vissi It realy sounds like a master cylinder.
Same thin... Dec 7, 2006 - 8:41 AM
vsideboy Personally I don't know too much about the clu... Dec 7, 2006 - 8:44 AM
y2komar It has happend to me. This seems to me a common p... Dec 8, 2006 - 11:52 AM
masterluie214 im having the same problem right now with mine....... Dec 9, 2006 - 5:36 AM
gnetik I am sure that the problem lies with the clutch ma... Dec 11, 2006 - 12:41 AM
vsideboy I will price one up.
I can just about manage to s... Dec 11, 2006 - 5:42 AM
BloodyStupidDavey "stand clear, shocking!"
"threa... Apr 30, 2008 - 12:18 PM
alltracman78 Most likely it's the master cylinder.
Sitting... Apr 30, 2008 - 10:02 PM
vsideboy Erm, oops, my solution was to buy an ST205 mate, I... May 1, 2008 - 3:30 AM
GreenyST204 Something is happening to my pedal today, drove to... May 1, 2008 - 6:08 AM![]() ![]() |
| Lo-Fi Version | Time is now: December 16th, 2025 - 5:19 PM |