![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 4, '04 From Northern New Jersey Currently Offline Reputation: 2 (100%) ![]() |
hey guys... someone please enlighten me!!! say i was gunna do the camry v6/solara tranny swap... i know i need the all-trac axles and the mr2t axles correct? my question is which all-trac axle CAN i use? st165, st185, or st205 axles??? or are they all the same???
![]() ![]() BBoY -------------------- ![]() ..(formerly daily driven) 3S-GTE powered celica currently set @ 12psi.. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 12, '02 From Columbus, Ohio Currently Offline Reputation: 15 (100%) ![]() |
Bboy is correct. The st205 front insulator and mount, the driver's side insulator, and passenger side insulator mount are basically the same. You need to use the rear inuslator from the st205 or get a custom bracket to fit you stock insulator. The rear brackets need to be from the st205, st185, or mr2 turbo. Bboy is right on the axles too. I think you can use the solara axles on the mr2 tranny also being that they are both and e153. And I think you can use the mr2 diff in the solara tranny.
This post has been edited by celica3sgte: Dec 17, 2006 - 6:33 PM |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 4:02 AM |