7AFE Turbo kit install by DCW, To one of our good known members celica :) Options

[doGGy]

Well guy and girls - i can proudly present another project witch i will try to document / write-up / expain to a smallest details as posible. The project is install of a Turbo kit to a Martin (malpaso) 96' ST celica.

Works begin tomorow - so i will try to write up every single day of work i will be spending on his car, all the jobs what was done, and what things are installed and WHY they are installed + how they work and etc. Hoping to make this write up to be usefull to a people who will be doing the same thing later, and for the people to understand better how things work and etc.

Keep and eye on this topic - cuz it will have lots of info and pics in the long run

As for now - Martin celica is securly standing in my yeard - and Martin is traveling back home with the bus (20h drive oh man.... ), so lets hope the owner will give his response in this topic later

Romas

[presure2]

romas, you should be able to plug a toyota 2 bar map right into your harness, and run the car with that.

[doGGy]

romas, you should be able to plug a toyota 2 bar map right into your harness, and run the car with that.

Hmm.. One thing im worried about is what at WOT or at Absolute atmosferic pressure stock map reads 3.6v and if 2 bar map will be reading lets say 4.6 stock ECU might give a Engine check and stall the engine, and might be so what there will be not enouth adjusting on Emanage to correct this (emanage allows only +50 / -50% correction).