 manual tranny ECU replacing.... |
 Jan 30, 2007 - 2:54 PM
|
 
|
|
Enthusiast  Joined Nov 23, '05 From Charleston, WV Currently Offline Reputation: 1 (100%)  |
Hy guys.
Quik question. I going to replace ECU for manual on my car, because I was running with auto ECU about half year and I was having problems with accelaration. Anyway. I did 't check yet and I think it should not be a problem to change it. Well here is a question. Does manual ECU plugs right in or is there anything what should I know before start swaping. Thanks a lot... |
 |
Replies
|
Jan 30, 2007 - 11:04 PM
|
|
 Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
I have a swapped manual. my M/T ECU plugged into the A/T harness, theres just extra things that aren't used... but I have a 97 and used a 96 ECU so its all OBD2, I'm not sure if OBD1 is different.
go for it. worse comes to worse just plug back in the A/T ECU you've been using and look for another solution. -------------------- |
Posts in this topic
miro1975 manual tranny ECU replacing.... Jan 30, 2007 - 2:54 PM
Coomer You'll probably want to compare pinouts on the... Jan 30, 2007 - 3:14 PM
miro1975 I'll try to do that if I will have any problem... Jan 30, 2007 - 3:56 PM miro1975 That's what I did. I was playing with it and d... Jan 30, 2007 - 11:18 PM Coomer If that's the case, you need pinouts for both ... Jan 30, 2007 - 11:55 PM miro1975 Thank you guys. I just going to rewire the last co... Jan 31, 2007 - 8:13 AM Batman722 you swapped trannys and you're still running y... Jan 31, 2007 - 10:37 AM miro1975 Yes I'm running my a/t ecu and everything is p... Jan 31, 2007 - 11:46 AM Batman722 I know that the A/T ECU does have a lower rev limi... Jan 31, 2007 - 12:54 PM miro1975 Plugs are OK (new). Must be just that A/T rpm lim... Jan 31, 2007 - 6:07 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 15th, 2025 - 10:50 AM |