installing remote start, installing remote start Options

[jason]

got the viper 791xv system, have everything hooked up and working nicely

*door locks
*alarm
*window up down
*auto up/down on the windows
*hood & trunk
*glass break
*prox

have all that working nicely except for the remote start

im nervous as all ever about hookin this up since ive never done it before, and i cant find a whole lot from searching that has alot of details as to hooking this system up. any help or a quick wiring explanation would be nice

aka green & black left rear power, green left rear ground

or however it is for speakers, would be nice

thanks again, im 100% sure someone out there did a write up prolly even a video on these since they are popular but i must not be searching right or something i dunno, any help is greatly appreciated!!!!

[hurley97]

if you have a manual you're either going to have to use a relay or something to wire it to your neutral start switch (to trick the car into thinking the clutch is depressed when you remote start, and when starting it manually you still have to push the clutch in) or just cut the wires and connect them so you never need the clutch to start the car. I believe the neutral start switch wires are black and black/yellow (they are on my auto harness anyway, but a factory 5spd probably has no difference in wire color)

thats all I got, sorry I can't be of more help but I'm sure someone else will be

This post has been edited by hurley97: Feb 6, 2007 - 11:57 AM